Philips HR1870 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Note: The integrated foam separator ensures clear juice as an end result.
9 Place the juice jug under the spout (Fig. 10).
Note: If you want to extract juice straight into a glass, use the spout accessory (Fig. 11).

The appliance only functions if all parts are assembled correctly and the locking arm is in locked
position.
1 Washthefruitand/orvegetablesand,ifnecessary,cutthemintopiecesthattintothe
feeding tube.
2 Make sure the juice jug is placed directly under the spout (Fig. 10).
Note: If you want to extract juice straight into a glass, use the spout accessory.
3 Turn the control knob to setting 1 (low speed) or 2 (normal speed) to switch on the
appliance (Fig. 12).
Note: For hard fruits or vegetables (e.g. apples, beetroots and carrots) we advise you to use speed 2
(normal speed). For soft fruits or vegetables (e.g. berries, kiwi, grapes, tomatoes, cucumber and melon) we
advise you to use speed 1 (low speed).
4 Putthepiecesinthefeedingtubeandgentlypressthemdowntowardstherotatinglter
with the pusher (Fig. 13).
Do not exert too much pressure on the pusher, as this could affect the quality of the end result. It
could even cause the lter to come to a halt.
Neverinsertyourngersoranobjectintothefeedingtube.
5 Alignthegrooveofthepusherwiththesmallprotrusionontheinsideofthefeedingtube
and slide the pusher into the feeding tube (Fig. 13).
6 Whenyouhaveprocessedallingredientsorwhentheintegratedpulpcontainerisfull,switch
offtheapplianceandunplugit.Waituntilthelterstopsrotating.
7 Toemptytheintegratedpulpcontainer,removethelid,thelterandthejuicecollector.
8 Formaximumavourandfreshness,servethejuiceimmediatelyafterpreparation.
Note: If you want to store the juice in the refrigerator, make sure the lid is on the juice jug.
Citrus press
Preparing the citrus press for use
1 Assemble the gear box onto the motor unit (Fig. 14).
2 Assemblethesieveholderontothemotorunit(Fig.15).
3 Assemblethesieveontothesieveholder(Fig.16).
4 Assemble the cone onto the gear box (Fig. 17).
5 Lift the locking arm to locked position (‘click’). (Fig. 18)
6 Place the juice jug under the spout (Fig. 19).
Note: If you want to extract juice straight into a glass, use the spout accessory.
ENGLISH8
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 155 156

Comments to this Manuals

No comments