Philips HR1870 User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
- Always place and use the appliance on a dry, stable and level surface.
- To ensure that the appliance stands stably, keep the surface on which the appliance stands and
the bottom of the appliance clean.
Caution
- This appliance is intended for household use only.
- Do not hold the appliance by the locking arm when you carry it.
- Never use any accessories or parts from other manufacturers or that Philips does not specically
recommend. If you use such accessories or parts, your guarantee becomes invalid.
- Make sure all parts are correctly assembled before you switch on the appliance.
- Only use the appliance when the locking arm is in locked position.
- Only lower the locking arm to unlocked position after you have switched off the appliance and
the lter has stopped rotating.
- Do not use the citrus press longer than 10 minutes without interruption.
- Never immerse the gear box in water nor rinse under the tap.
- Never clean the gear box in the dishwasher.
- Always unplug the appliance after use.
- Noise level: Lc = 78 dB(A).
Safety feature
- This appliance is tted with a safety feature which safeguards against overheating due to
excessive loads. In case of overheating, the juicer automatically activates the overload protection
and switches itself off. If this occurs, set the control knob to 0, unplug the appliance and let it
cool down for 15 minutes. Remove the juice jug and detach the lid, juice collector and the
integrated pulp container and then press the overload protection button on the bottom of the
motor unit (Fig. 2).

This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.

Thoroughly clean the parts that come into contact with food before you use the appliance for the
rst time (see chapter ‘Cleaning and storage’).

Juicer
Preparing the juicer for use
1 Make sure all detachable parts are clean (see chapter ‘Cleaning and storage’).
2 Unwind the mains cord from the base of the motor unit (Fig. 3).
3 Assemble the integrated pulp container onto motor unit (Fig. 4).
4 Assemble the juice collector onto the integrated pulp container (Fig. 5).
5 Assemblethelterontothedrivingshaftofthemotorunit.Makesurethelteristted
securelyontothedrivingshaft(‘click’)(Fig.6).
6 Assemble the lid onto the juicer (Fig. 7).
7 Lift the locking arm to locked position (‘click’) (Fig. 8).
8 Placethelidonthejuicejugtoavoidspattering(Fig.9).
ENGLISH 7
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 155 156

Comments to this Manuals

No comments