Philips HR1896/70 User Manual download pdf (Page 8)

Built-in safety lock

The appliance is equipped with a built-in safety lock. The two safety pins on the motor unit ensure

that you can only switch on the appliance if you have placed the juicing unit and the pulp container

on the motor unit correctly.

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to

electromagnetic elds.

Before rst use

Thoroughly clean all parts before you use the appliance for the rst time (see chapter ‘Cleaning’).

Note: Make sure all parts are completely dry before you start using the appliance.

Preparing for use

Assembling the juicing unit

Always unwind the mains cord completely before you switch on the appliance.

1 Attach the pulp outlet to the juicing unit and turn it clockwise until the arrow ( Á)

points to the ‘locked’ indication. (Fig. 2)

2 Insert the juicing screw into the juicing unit (Fig. 3).

3 Assemblethetwopartsofthelter(Fig.4).

4 Placethetwo-partlteroverthejuicingscrew(Fig.5).

Tip: Use the black two-part lter for clear juice. If you prefer cloudy juice with more bres in it,

use the grey two-part lter.

5 Attach the spout to the juicing unit and turn it clockwise until the arrow ( Á)

points to the ‘locked’ indication. (Fig. 6)

6 Place the berry tray on the feeding tube (Fig. 7).

Placing the juicing unit onto the motor unit

1 Placetheassembledjuicingunitontothemotorunit,withthepulpoutletttingintothe

opening on the motor unit (Fig. 8).

2 Align the projections on the juicing unit with the recesses in the motor unit.

Slide the juicing unit onto the motor unit until it locks into place. (Fig. 9)

3 Press the juicing unit onto the motor unit (1) and then close the locking clamp (2). (Fig. 10)

Note: If the locking clamp cannot be closed, check if the juicing unit is positioned properly with the

projections on the juicing unit into the recesses of the motor unit.

4 Slide the pulp container into the motor unit (Fig. 11).

ENGLISH8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 53 54

Comments to this Manuals

No comments