Philips AC5659/10 User Manual download pdf (Page 9)

7EN

English

4 Using the air

purifier

Understanding the air

quality light

PM2.5

level

Air quality

light color

Air quality

level

≤12 Blue Good

13-35 Blue-Purple Fair

36-55 Purple-Red Poor

>55 Red Very poor

The air quality light automatically goes

on when the air purier is switched on,

and lights up all colors in sequence.

After approximately 30 seconds, the

air quality sensors select the color that

corresponds to the surrounding air

quality of airborne particles.

PM2.5

AeraSense sensing technology

accurately detects and quickly responds

to even the slightest particle change in

the air. It provides you with reassurance

with real-time PM2.5 feedback.

IAI

The professional-grade AeraSense

sensor detects the level of indoor air

allergen and with numerical feedback

from 1 to 12 the potential risk level of

indoor air allergens can be displayed. 1

indicates best air quality.

GAS

With an advanced as sensor, a display

ranging from L1 to L4 shows the density

level of potential harmful gases (incl.

VOC, odor, etc.) detected. L1 indicates

best air quality.

Note

• This instruction is only valid when

the air purier is being set up for the

rst time. If the network has changed

or the setup needs to be performed

again, consult section “Reset the Wi-Fi

connection” on page 7.

• If you want to connect more than one

air purier to your smart device, you

have to do this successively. Complete

the set up of one air purier before you

turn on the other air purier.

• Make sure that the distance between

your mobile device and the air

purier is less than 10 m without any

obstructions.

• This App supports the latest versions

of Android and iOS. Please check

www.philips.com/purier-compatibility

for the latest update of supported

operating systems and devices.

Reset the Wi-Fi connection

Note

• This applies when the default network

to which your purier is connected has

changed.

• Reset the Wi-Fi connection when your

default network has changed.

1 Put the plug of the air purier in the

power socket and touch to turn

on the air purier.

2 Touch and simultaneously for

3 seconds until you hear a beep.

» The air purier goes to pairing

mode.

» The Wi-Fi indicator blinks

orange.

3 Follow the steps 4-5 in "Setting up

the Wi-Fi connection for the rst

time" section.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 145 146

Comments to this Manuals

No comments