Philips AC5659/10 User Manual download pdf (Page 15)

13EN

English

Filter alert light

status

Action

A3 displays on the

screen and the

lter replacement

alert goes on

Replace the

NanoProtect

lter Series 3

(FY5185)

C7 displays on the

screen and the

lter replacement

alert goes on

Replace the

NanoProtect lter

Active Carbon

(FY5182)

A3 and C7 display

on the screen

alternately and the

lter replacement

alert goes on

Replace both

lters

1 Turn o the air purier and unplug

from the power socket.

2 Take out the used air lter according

to the lter alert light status

displayed on the screen. Discard

used lters (g. ).

Note

• Do not touch the pleated lter surface,

or smell the lters as they have

collected pollutants from the air.

3 Remove all packaging material from

the new lters (g. f).

4 Place the new lters into the air

purier (g. g).

5 Put the plug of the air purier in the

power socket.

6 Touch and hold the reset button

for 3 seconds to reset the lter

lifetime counter.

6 Replacing the

filters

Filter replacement

indicator

This air purier is equipped with a

lter replacement indicator to make

sure that the air purication lter is in

optimal condition when the air purier

is operating. When the lters need to be

replaced, the lter code displays on the

screen (see Filter alert chart).

If the lters are not replaced in time,

the air purier will stop operating and

automatically lock to protect the air

quality in the room. Replace the lters

as soon as possible according to the

lter code.

Replacing the lters

Note

• The air lters are not washable or

reusable.

• Always turn o the air purier and

unplug from the electrical outlet

before replacing the lters.

• Do not clean the lters with a vacuum.

• If the pre-lter is damaged, worn or

broken, do not use. Visit

www.philips.com/support or contact

the Consumer Care Center in your

country.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 145 146

Comments to this Manuals

No comments