6 EN
3 Getting started
Installing the lters
Note
• Make sure the air purier is unplugged
from the electrical outlet before
installing the lters.
• Make sure the side of the lter with the
tag is pointing towards you.
1 Pull the top part of the side panel to
remove it from the air purier
(g. c).
2 Press the two clips down (1) and pull
the pre-lter towards you (2)
(g. d).
3 Remove all lters (g. e).
4 Remove all packaging materials
from the lters (g. f).
5 Place the thick lter (FY5185) into
the air purier and then the thin
Active Carbon lter (FY5182). The
model numbers are shown on each
lter (g. g).
6 Attach the pre-lter back into the
air purier (g. h).
Note
• Make sure the side with the two clips
is pointing towards you, and that all
hooks of the pre-lter are properly
attached to the purier.
7 Reattach the front panel by pressing
the top part of the panel onto the
top of the air purier (1). Then, gently
push the panel against the body of
the air purier (2) (g. i).
8 Repeat the above steps and
assemble the lter for the other side
of the air purier.
9 Wash your hands thoroughly after
installing lters.
Wi-Fi connection
Setting up the Wi-Fi connection
for the rst time
1 Download and install the 'Air
Matters' app the App Store or
Google Play.
2 Put the plug of the air purier in the
power socket and touch to turn
on the air purier.
» The Wi-Fi indicator blinks
orange for the rst time.
3 Make sure that your mobile device
is successfully connected to your
Wi-Fi network.
4 Launch the 'Air Matters' app and
click on the ‘+’ on the top right of
the screen. Follow the onscreen
instructions to connect the air
purier to your network.
5 After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the 'Air Matters'
App for extensive and up-to-date
troubleshooting tips.
Comments to this Manuals