12 EN
Note
• If the air purier is used in a dusty
environment, it may need to be cleaned
more often.
• If the humidity level in the room is very
high, condensation may develop on the
air quality sensor and the air quality light
may indicate a poorer air quality even
though the air quality is actually good. If
this occurs, clean the air quality sensor
or use the air purier on a manual speed
setting.
1 Switch o the air purier and unplug
from the power socket.
2 Clean the air quality sensor inlet and
outlet with a soft brush (g. y).
3 Open the air quality sensor cover
(g. z).
4 Clean the air quality sensor, the
dust inlet and the dust outlet with a
damp cotton swab (g. {).
5 Dry all parts thoroughly with a dry
cotton swab.
6 Reattach the air quality sensor cover
(g. |).
Cleaning the pre-lter
Clean the pre-lter when F0 is displayed
on the screen and the pre-lter cleaning
indicator is on (g. }).
1 Switch o the air purier and unplug
from the power socket.
2 Pull the top part of the side panel to
remove it from the air purier
(g. c).
3 Press the two clips down (1) and pull
the pre-lter towards you (2)
(g. d).
4 If the pre-lter is very dirty, use a
soft brush to brush away the dust.
Then wash the pre-lter under
running tap water (g. ~).
5 Allow the pre-lter to air dry
thoroughly before placing back in the
air purier.
6 Put the pre-lter back into the air
purier (g. h).
Note
• To optimize the lifetime of the pre-
lter, make sure it air dries completely
after cleaning.
• Wash your hands after handling the
lter.
• Make sure the side with the two clips
is pointing towards you, and that all
hooks of the pre-lter are properly
attached to the air purier.
7 To reattach the front panel, press the
top part of the panel onto the top of
the air purier (1). Then, gently push
the panel against the body of the air
purier (2) (g. i).
8 Put the plug of the air purier in the
power socket.
9 Touch the button to switch on the
appliance.
10 Touch and hold the reset button
for 3 seconds to reset the pre-lter
cleaning time.
11 Wash your hands thoroughly after
installing lters.
Comments to this Manuals