Philips SC2001/01 User Manual download pdf (Page 17)

4 Press the % button to increase the intensity. To lower the intensity,

press the ^button.

, Every time you press the button, the corresponding intensity

light starts to ash. This takes a few seconds.

5 Place the appliance in a 90° angle on the skin so that the attachment

and the safety ring are in contact with the skin.

6 Press the safety ring fully onto the skin with slight pressure.

Note: The safety ring has contact switches that together are the safety system

of the appliance. This safety ring prevents unintentional ashing without skin

contact.

, The ‘ready to ash’ light on the back of the appliance lights up green

when all contact switches of the safety ring are in contact with the

skin and the appliance is charged. This may take up to 3.5 seconds.

Tip: For easier use, stretch the area of skin you want to treat. On areas with

softer skin, you may need to exert more pressure on the appliance to push in

all contact switches.

7 Press the ash button to release a ash.

Note: The visible light produced by the appliance is the reection of the ash

on the skin and is harmless to your eyes. It is not necessary to wear goggles

during use.

8 Let go of the ash button after the appliance has ashed.

9 For the next ash, repeat steps 6 to 9. After each ash it takes up to

3.5 seconds until the appliance is ready to ash again.

Do not treat exactly the same area multiple times during one session.

This does not improve the effectiveness of the treatment, but increases

the risk of skin reactions.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 101 102

No comments

Philips SC2001/01 User Manual Page 17