Philips HR2020/70 User Manual download pdf (Page 7)

If food sticks to the wall of the blender jar, switch off the appliance and unplug it. Then use a

spatula to remove the food from the wall.

Always make sure the lid is properly assembled on the jar and the measuring cup is inserted

properly in the lid before you switch on the appliance.

Never forget to place the sealing ring on the blade unit before you connect the blade unit to

the blender jar, otherwise leakage will occur.

Do not let the appliance run for more than 3 minutes at a time.

Always let the appliance cool down to room temperature between processing cycles.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this user manual, the appliance is safe to use based on

scientic evidence available today.

Built-in safety lock

This feature ensures that you can only switch on the appliance if you have properly assembled the

blender jar on the motor unit. If the blender jar is correctly assembled, the built-in safety lock will be

unlocked.

General description (Fig. 1)

A Measuring cup

B Lid of blender jar

C Blender jar

D Level indication

E Sealing ring

F Blade unit

G Motor unit

H Control panel

Speed buttons (1 and 2)

Pulse/off button

Before rst use

Thoroughly clean the parts that come into contact with food before you use the appliance for the

rst time (see chapter ‘Cleaning’).

Using the appliance

You can adjust the length of the cord by winding part of it round the reel in the base. Pass the cord

through the slot in the base.

Blender

The blender is intended for ne pureeing, chopping and blending. With the blender you can prepare

soups, sauces and milk shakes. You can also use it to process vegetables, fruit, meat, pancake batter

etc.

Preparing the blender for use

1 Assemble the sealing ring on the blender blade unit (Fig. 2).

2 Put the blade unit in the bottom of the blender jar (1). Screw the blade unit anticlockwise (2)

until it is xed properly (Fig. 3).

3 Put the blender jar with the blade unit attached on the motor unit and x it by turning it

clockwise (‘click’) (Fig. 4).

-

-

-

-

-

-

-

ENGLISH 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments