Philips GC9670/50 User Manual download pdf (Page 9)

ENGLISH

Auto shut-o

- The appliances enters the standby mode if it has not been

used for 10 minutes. The light in the on/ o button starts to

ash.

- To activate the appliance again, press the on/o button.

The appliance starts to heat up again.

- The appliance switches o automatically if it has not been

used for another 10 minutes after it enters the standby

mode. The light in the on/o button goes o.

Ironing tips

Minimising wrinkles while drying

Start wrinkle removal early in the drying process by spreading

out your laundry properly after washing and by putting

garments on hangers to make them dry naturally with fewer

wrinkles.

Best practice shirt ironing

Start with the time-consuming parts like collar, cu links and

sleeves. Next, iron the bigger parts like front and back to

prevent wrinkling the bigger parts when you are busy ironing

the time-consuming parts.

Collar: When you iron a collar, start on its underside and work

from the outside (the pointy end) inwards. Turn over and

repeat. Fold down the collar and press the edge for a more

crisp nish.

Buttons: Iron on the reverse side of the buttons for more

eective and faster ironing.

Cleaning and maintenance

To properly maintain your appliance, clean the iron and the

appliance regularly.

1 Clean the appliance with a moist cloth. To remove

stubborn stains, you can use a small amount of washing-

up liquid.

2 To easily and eectively remove stains from the soleplate,

switch on the appliance and let it heat up. When the

appliance has heated up, move the iron over a moist cloth

while you press the steam trigger.

Tip: Clean the soleplate regularly to ensure smooth gliding.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 105 106

No comments

Philips GC9670/50 User Manual Page 9