Philips 47PDL6907H Specifications download pdf (Page 8)

**To fulfill EMC regulations, use a shielded FTP Cat. 5E

Ethernet cable.

Network settings

To open the Network settings, press h and select S Setup

and press OK.

Select Network settings and press OK.

View network settings

All current network settings are shown here. The IP and MAC

address, signal strength, speed, encryption method, etc.

Network type

Sets the network to Wired or Wireless.

Network configuration

Sets the network configuration to DHCP & Auto IP or Static IP.

Static IP configuration

If Static IP is set, you can set all necessary static IP settings

here.

Digital Media Renderer - DMR

To receive multimedia files from smartphones or tablets, set

the DMR to On.

TV network name

If you have more than one TV in your network, you can

rename the TVs here.

Clear Internet memory

With Clear Internet memory you clear all Internet files stored

on your TV. You clear your Philips Smart TV registration and

parental rating setting, your video store app logins, all Smart TV

app favourites, Internet bookmarks and history. Interactive

MHEG applications can also save so-called 'cookies', on your

TV. These files will also be cleared.

2.5

Connect devices

Tips on connections

Connectivity guide

Always connect a device to the TV with the highest quality

connection available. Also, use good quality cables to ensure a

good transfer of picture and sound.

If you need help to connect several devices to the TV, you can

visit the Philips TV connectivity guide. The guide offers

information on how to connect and which cables to use.

Go to www.connectivityguide.philips.com

Antenna

If you have a Set-top box (a digital receiver) or Recorder,

connect the antenna cables to run the antenna signal through

the Set-top box and/or Recorder first before it enters the TV.

In this way, the antenna and the Set-top box can send possible

additional channels to the Recorder to record.

HDMI

An HDMI connection has the best picture and sound quality.

One HDMI cable combines video and audio signals. Use an

HDMI cable for High Definition (HD) TV signals. For best signal

quality transfer, do not use an HDMI cable longer than 5 m.

EasyLink HDMI CEC

If your devices are connected with HDMI and have EasyLink,

you can operate them with the TV remote control. EasyLink

HDMI CEC must be switched on on the TV and the

connected device.

In Help, press L List and look up EasyLink HDMI CEC for

more information on using EasyLink.

HDMI ARC

All of the HDMI connections on the TV have ARC (Audio

Return Channel).

If the device, typically a Home Theatre System (HTS), also has

the HDMI ARC connection, connect it to any of the HDMI

connections on this TV. With the HDMI ARC connection, you

do not need to connect the extra audio cable that sends the

sound of the TV picture to the HTS. The HDMI ARC

connection combines both signals.

You can use any HDMI connection on this TV to connect the

HTS but ARC is only available for 1 device/connection at a

time.

In case you prefer to switch off ARC on the HDMI

connections, press h and select S Setup and press OK.

Select TV settings > Sound > Advanced > HDMI ARC.

DVI to HDMI

8 Setting up / Connect devices

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 57 58

Comments to this Manuals

No comments

Philips 47PDL6907H Specifications Page 8

Comments to this Manuals

Related products and manuals for LED TVs Philips 47PDL6907H