Philips 47PDL6907H Specifications download pdf (Page 12)

Audio to video synchronisation (sync)

If the sound does not match the video on screen, you can set

a delay on most DVD Home Theatre Systems to match the

sound and video. A mismatch can be visible in scenes with

people talking. When they finish sentences before their lips

stop moving.

In Help, press L List and look up Audio to video sync for

more information.

Audio to video sync

With a Home Theatre System (HTS) connected to the TV,

the picture on TV and the sound from the HTS should be

synchronised. A mismatch can be visible in scenes with people

talking - when they finish sentences before their lips stop

moving or just the opposite.

Automatic audio to video sync

With recent Philips Home Theatre Systems, the audio to

video sync is automatically synchronised and always correct.

Audio sync delay

For some Home Theatre Systems you might need to adjust

the audio sync delay to synchronise the audio to video. On the

HTS, increase the delay value until there is a match between

picture and sound. A delay value of 180ms may be required.

Read the user manual of the HTS.

With a delay value set up on the HTS, you need to switch off

Audio Out delay on the TV. To switch off Audio Out delay,

press h and select S Setup and press OK.

Select TV settings > Sound > Audio Out delay. Select Off

and press OK.

Audio Out Offset

If you cannot set a delay on the Home Theatre System, you

can set the TV to sync the sound.

To synchronize the sound on the TV, press h and select S

Setup and press OK.

Select TV settings > Sound > Audio Out offset. Use the

slider bar to set the sound offset and press OK. The value set

compensates the time necessary for the Home Theatre

System to process the sound of the TV picture. You can set

the offset in steps of 5ms. Maximum setting is -60ms. The

Audio Out delay setting should be switched on.

Audio Out Settings

Audio Out format

The standard setting for Audio Out format is Multichannel.

Home Theatre Systems with multichannel sound capabilities

(Dolby Digital, DTS® or similar) can receive a compressed

multichannel sound signal from a TV channel or a connected

disc player.

To set the Audio Out format, press h and select S Setup

and press OK.

Select TV settings > Sound > Audio Out format.

If you have a Home Theatre System without any multichannel

sound processing capabilities, select Stereo.

Audio Out levelling

Use the Audio Out levelling setting to level the volume

(loudness) of the TV and the Home Theatre System when

you switch over from one to another. Volume differences can

be caused by differences in sound processing.

To level the difference, press h and select S Setup and

press OK.

Select TV settings > Sound > Audio Out levelling.

If the volume difference is large, select More. If the volume

difference is small, select Less.

Audio Out levelling affects both the Audio Out - Optical and

HDMI-ARC sound signals.

Blu-ray Disc Player

Use an HDMI cable to connect the Blu-ray Disc player to the

TV.

If the Blu-ray Disc player has EasyLink HDMI CEC, you can

operate the player with the TV remote control.

In Help, press L List and look up EasyLink HDMI CEC for

more information.

DVD Player

Use an HDMI cable to connect the DVD player to the TV.

Alternatively, you can use a SCART cable if the device has no

HDMI connection.

12 Setting up / Connect devices

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 57 58

Comments to this Manuals

No comments

Philips 47PDL6907H Specifications Page 12

Comments to this Manuals

Related products and manuals for LED TVs Philips 47PDL6907H