Philips 47PDL6907H Specifications download pdf (Page 24)

In some countries, different TV channels (broadcasters) might

have the same channel number. While installing, the TV

shows the list with channel number conflicts. You need to

select which TV channel you want to install on a channel

number with multiple TV channels.

DVB-T + DVB-C

If you can use a DVB-T antenna input but also a DVB-C input,

you can set up your TV for both DVB-T and DVB-C. Install one

system followed by the other with the necessary settings.

Once each system is installed, you need to switch the antenna

input signal on the Antenna connection on the back of the TV

and set the TV in the appropriate system to view the installed

channels on TV.

To select the DVB-T or DVB-C setting, see above.

Reception quality

If you receive digital channels, you can check the quality and

signal strength of a channel.

If you have your own antenna, you can reposition the antenna

to try and improve the reception.

To check the reception quality of a digital channel, switch to

the channel.

Press h, select S Setup and press OK.

Select Channel settings and press OK. Select Channel

installation > Digital : reception test and press OK.

The digital frequency is shown for this channel. If the reception

is poor, you can reposition your antenna. To check the signal

quality of this frequency again, select Search and press OK.

To enter a specific digital frequency yourself, use the remote

control digit keys. Alternatively, select the frequency, position

the arrows on a number with w and x and change the number

with u and v. To check the frequency, select Search and

press OK.

If you use DVB-C to receive channels, the options Symbol rate

mode and Predefined symbol rates are available. For Symbol

rate mode, select Automatic, unless your cable provider gave

you a specific symbol rate value. To enter the symbol rate

value, use the number keys.

Manual installation

Analogue TV channels can be manually installed, channel by

channel.

To install analogue channels manually, press h, select S

Setup and press OK.

Select Channel settings and press OK.

Select Channel installation > Analogue : manual installation

and press OK.

1 - System

To set up the TV system, select System and press OK.

Select your country or the part of the world where you are

now.

2 - Find channel

To find a channel, select Find channel and press OK. Select

Search and press OK. You can also enter a frequency yourself.

If the reception is poor, press Search again. If you want to store

the channel, select Done and press OK.

3 - Fine tune

To fine tune a channel, select Fine tune and press OK. You

can fine tune the channel with u or v.

If you want to store the channel found, select Done and press

OK.

4 - Store

You can store the channel on the current channel number or

as a new channel number.

Select Store current channel or Store as new channel.

You can redo these steps until you found all available analogue

TV channels.

Picture format

If black bars appear on top and bottom or on both sides of the

picture, you can adjust the picture format to a format that fills

the screen.

While watching a TV channel, press f FORMAT to open

the Picture format menu.

Select a format from the list and press OK.

Picture formats

The following formats are available according to the picture on

screen:

• Auto fill

Automatically enlarges the picture to fill the screen. Picture

distortion is minimal, subtitles remain visible. Not suitable for

PC input. Some extreme picture formats can still show black

bars.

• Auto zoom

Automatically zooms in the picture to fill the screen as much

as possible without distortion. Black bars may be visible. Not

suitable for PC input.

• Super zoom

Removes the black bars on the side of 4:3 broadcasts. The

picture is adjusted to fit the screen.

• Movie expand 16:9

Scales the picture to a 16:9 format.

• Wide screen

Stretches the picture to a 16:9 format.

• Unscaled

Expert mode for HD or PC input. Pixel for pixel display. Black

bars may appear with pictures from a computer.

Text

Text pages

Open Text

To open Text while you are watching TV channels, press

TEXT.

To close Text, press TEXT again.

24 TV / Watch TV

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

Comments to this Manuals

No comments

Philips 47PDL6907H Specifications Page 24

Comments to this Manuals

Related products and manuals for LED TVs Philips 47PDL6907H