Philips AC4012/10 User Manual download pdf (Page 8)

6

EN

Switch on

1

Put the plug of the air purier into

the power outlet.

» All lights go on twice and you

hear a beep. Then, the lights go

out again.

2 Press the



button to switch on the

purier (g i).

» The air quality light shows the

current air quality.

» The fan speed

light goes on

(g j).

3 Press the



button to switch o the

purier.

Set the sensitivity of the

air quality sensor

People with certain health problems

(for example: allergies or asthma) have

a greater need for healthy air. For this

reason, the purier allows you to adjust

the sensitivity of the air quality sensor. If

you set it to higher sensitivity level, the

purier starts cleaning the air at lower

pollution level.

There are 3 sensitivity levels:

• Extra sensitive (default setting)

• Sensitive

• Standard

You can adjust the sensitivity of the air

quality sensor in the following way.

Note

• When it is set to a higher sensitivity,

the purier starts cleaning the air at

lower pollution levels to make the air

even cleaner. Plug the purier before

adjusting the sensitivity of the air

quality sensor.

4 Use the air

purifier

Understand the air

quality light

Color of the air

quality light ring

Air quality level

Blue Good

Purple Fair

Red Bad

The air quality light automatically goes

on when the purier is switched on.

Note

• The built-in air quality sensor measures

the air quality and automatically selects

the appropriate color of the air quality

light. When the air is clean, the color

of the air quality light is in blue. When

the air quality deteriorates, the color of

the air quality light changes to purple

or red.

Understand the healthy

air protect alert

The lter replacement light ( )

indicates the lters have to be replaced

(g h).

Healthy air protect alert Follow this

Filter replacement light

is on continuously.

This lasts approximately

for 2 weeks. On the last

day of 2 weeks, the

purier beeps every 30

minutes to inform you

that the lters need to

be replaced.

Replace the

NanoProtect

Activated

Carbon lter

and the

NanoProtect

lter.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 93 94

Comments to this Manuals

No comments