Philips Wake-up Light User Manual download pdf (Page 8)

Preparing for use

Setting the clock

1 Put the plug in the wall socket.

, The hour indication on the display starts ashing to indicate that you have to set the clock

time (Fig. 6).

2 Press the menu + or - button to set the hour.

Note: You can only do this when you are in the set clock menu and when the hour indication ashes.

If this is not the case, press the MENU button, use the menu + or - button to select the set clock menu

and press the SELECT button to conrm. You are now in the set clock menu.

3 Press the SELECT button to conrm.

, The minute indication starts ashing (Fig. 7).

4 Press the menu + or - button to set the minutes.

5 Press the SELECT button to conrm.

, The appliance leaves the menu and the display shows the set clock time.

The appliance is now ready for use.

Note: Every time you remove the plug from the wall socket for more than approximately 15 minutes, you

have to set the clock time again in the way described above. To change the set clock time when the plug

is still in the wall socket, see section ‘Menu functions’ in chapter ‘Using the appliance’.

Using the appliance

Menu functions

Below you nd a description of all functions that can be set in the menu. These functions appear in

the menu in the following order:

- Clock time

- Alarm time

- Alarm sound

- Sunset simulation

- Display brightness: You can choose a display brightness between 1 and 4.

You can set the menu functions in the following way:

1 Press the MENU button to enter the menu (Fig. 8).

2 Press the menu + or - button to select a function (Fig. 9).

3 Press the SELECT button to enter this function (Fig. 10).

4 Press the menu + or - button to change a setting (Fig. 9).

5 Press the SELECT button to conrm (Fig. 10).

Using the lamp

You can use the appliance as a bedside lamp.

1 To switch on the lamp, press the lamp on/off button (Fig. 11).

2 Press the light intensity + and - buttons to select a light intensity (Fig. 12).

You can choose a light intensity between 1 and 20.

Note: It takes approx. 1 second for the lamp to go on. This is normal, the lamp needs to heat up.

Note: The light intensity you have selected is automatically set as the light intensity level for the alarm as

well.

ENGLISH8

4222_002_7572_2_DFU-Booklet_A5_v1.indd 8 11/29/2012 10:45:19 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 119 120

Comments to this Manuals

No comments

Philips Wake-up Light User Manual Page 8

Comments to this Manuals

Related products and manuals for Light therapy Philips Wake-up Light