2 If the appliance is equipped with an infrared remote control (specic types only), press the
standby button to switch off the vacuum cleaner temporarily, for instance when you have to
move some furniture. (Fig. 20)
3 To continue vacuum cleaning, press the standby button again. The appliance then starts
operating at the previously selected suction power setting again.
Always unplug the appliance before you replace the disposable dustbag or empty the reusable
dustbag.
- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.
even when the nozzle is not placed on the oor (Fig. 21).
1 Pull the cover upwards to open it (Fig. 22).
2 Lift the dustbag holder out of the appliance (Fig. 23).
Make sure you hold the dustbag upright when you lift it out of the appliance.
3 Pull at the cardboard tag to remove the full dustbag from the holder (Fig. 24).
, The dustbag is sealed automatically.
4 Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as
far as possible. (Fig. 25)
5 Put the dustbag holder back into the vacuum cleaner.
Note: If you have not inserted a dustbag, you cannot close the cover.
In some countries, this vacuum cleaner also comes with a reusable dustbag that can be used and
emptied repeatedly. You can use the reusable dustbag instead of disposable dustbags.
1 Remove the reusable dustbag from the appliance and the holder as described in section
‘Replacing the disposable dustbag’ above.
2 Slide the clip off the dustbag sideways.
3 Shake out the contents into a dustbin.
4 To close the dustbag, slide the clip back onto the bottom edge of the dustbag.
5 Reinsert the reusable dustbag into the holder and the appliance as described in
section ‘Replacing the disposable dustbag’ above.
Always unplug the appliance before you clean or replace the lters
Note: Only wipe the body of the appliance with a moist cloth.
Clean the permanent motor protection lter every time you replace or empty the dustbag.
1 Remove the dustbag holder with the dustbag (Fig. 23).
2 Press the lter holder release tab (1) and take the lter holder out of the appliance (2). Take
the motor protection lter out of the lter holder. (Fig. 26)
9
Comments to this Manuals