Philips HI518 Instruction for Use download pdf (Page 7)

Before first use

1 Remove any sticker or protective foil from the soleplate and

clean it with a soft cloth.

Always put the iron on a flat, stable surface to prevent the iron from

toppling over (avoid putting it too close to the edges of the ironing

board or table). Make sure that the mains cord does not obstruct any

passage.

The iron may give off some smoke when you use it for the first time.This

will cease after a short while.

Preparing for use

Filling the water tank

Never immerse the iron in water.

1 Make sure the appliance is unplugged.

1 Set the steam control to position 0 (= no steam).

2 Put the iron on its heel and open the cap of the filling opening.

3 Fill the water tank with tap water up to the maximum level by

means of the filling cup.

Do not fill the tank beyond the MAX indication.

◗ If the tap water in your area is very hard, we advise you to use

distilled water.

Do not put perfume, vinegar, starch, descaling agents, ironing additives

chemically descaled water or other chemicals in the water tank.

4 Close the cap of the filling opening.

Setting the temperature

1 Put the iron on its heel.

ENGLISH 7

4239 000 44177 28-09-2004 11:52 Pagina 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 129 130

No comments

Philips HI518 Instruction for Use Page 7