Philips Azur Steam User Manual download pdf (Page 10)

Note: If the set ironing temperature is too low (MIN to 2), water may drip

from the soleplate (see chapter ‘Features, section ‘Drip stop’).



When you use the Ionic DeepSteam function during steam ironing, the

steam produced is ner than during regular steam ironing. Fine steam

reaches deeper, especially into thick fabrics. This helps you to remove

stubborn creases easily.

1 Follow steps 1 to 3 in section ‘Steam ironing’.

2 Press and hold the Ionic DeepSteam button (Fig. 8).

, The Ionic DeepSteam light goes on and you hear a humming

sound. (Fig. 9)

3 The iron now produces Ionic DeepSteam to help you remove even

the toughest creases.

Note: The Ionic DeepSteam function is only effective when it is used in

combination with a steam setting and a temperature setting between 2

and MAX.

Note: Do not use the Ionic DeepSteam function when you iron without steam

and/or at low temperature settings. However, ironing at low temperatures

without steam with the Ionic DeepSteam function switched on will not

damage the iron.

Note: The Ionic DeepSteam output may vary from time to time, depending on

the ironing temperature.



1 Set the steam control to position 0 (= no steam) (Fig. 2).

Do not use the Ionic DeepSteam function, as this function has no effect

when you iron without steam.

2 Set the required ironing temperature (see chapter ‘Preparing for

use’, section ‘Setting the temperature’).

10

4239.000.6215.6.indd 10 23-10-09 10:05

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

No comments

Philips Azur Steam User Manual Page 10