Philips HTS3541 User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
22 EN
Speakers
Center speaker:
Output power: 50 W RMS (30% THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 63.5 mm (2.5") woofer
Dimensions (WxHxD): 159 x 84.5 x 80 mm
Weight: 0.35 kg
Front/Rear speaker:
Output power: 4 x 50 W RMS (30% THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 63.5 mm (2.5") woofer
Dimensions (WxHxD): 84.5 x 159 x 80 mm
Weight: 0.35 kg/each
Remote control batteries
2 x AAA-R03-1.5 V
Laser
Laser Type (Diode): InGaN/AIGaN (BD),
AIGaInP (DVD/CD)
Wave length: 405 +7 nm/-7 nm (BD), 655
+10 nm/-10 nm (DVD), 790 +10 nm/-20 nm
(CD)
Output power (Max. ratings): 20 mW (BD), 6
mW (DVD), 7 mW (CD)
8 Troubleshooting
Warning
Risk of electric shock. Never remove the casing
of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, get support at www.philips.
com/support.
Main unit
The buttons on the home theater do not work.
Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Picture
No picture.
Make sure that the TV is switched to the
correct source for the home theater.
No picture on a TV connected through HDMI.
Make sure that the HDMI cable is not faulty. If
it is faulty, replace it with a new cable.
Press ( Home ) and then 731 on the
remote control to restore the default picture
resolution.
Change the HDMI video setting, or wait for
10 seconds for auto recovery (see 'Picture
and video settings' on page 17 ) .
Disc does not play high-de nition video.
Make sure that the disc contains high-
de nition video.
Make sure that the TV supports high-
de nition video.
Use an HDMI cable to connect to the TV.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments