Philips HTS3541 User Manual download pdf (Page 19)

17

English

EN

5 Change settings

The home theater settings are already conﬁ gured

for optimal performance. Unless you have a reason

to change a setting, we recommend that you keep

the default setting.

Note

•

You cannot change a setting that is grayed out.

• To return to the previous menu, press

BACK . To exit the menu, press

( Home ).

Language settings

1 Press ( Home ).

2 Select [Setup] , and then press OK .

3 Select [Preference] , and then press OK .

4 Press the Navigation buttons and OK to

select and change:

• [Menu language] : Select a display

language for menu.

• [Audio] : Select an audio language for discs.

• [Subtitle] : Select a subtitle language for discs.

• [Disc Menu] : Select a menu language for

discs.

Note

•

If your preferred disc language is not available,

select [Others] from the list, and enter the

4-digit language code found at the end of this

user manual .

• If you select a language that is not available on a

disc, the home theater uses the default language

of the disc.

Picture and video settings

1 Press ( Home ).

2 Select [Setup] , and then press OK .

3 Select [Video] , and then press OK .

4 Press the Navigation buttons and OK to

select and change:

• [TV Display] : Select a picture format to

ﬁ t the TV screen.

• [HDMI Video] : Select the resolution of

video signal that is output from HDMI OUT

(ARC) on your home theater. To enjoy the

selected resolution, make sure that your TV

supports the selected resolution.

• [HDMI Deep Color] : Recreate the natural

world on your TV screen by displaying

vivid images using billion colors. Your home

theater must be connected to a Deep

Color enabled TV through an HDMI cable.

• [Picture Settings] : Select pre deﬁ ned

color settings for the video display.

• [Watch 3D video] : Set HDMI video to

support 3D or 2D video.

Note

•

If you change a setting, make sure that the TV

supports the new setting.

Audio settings

1 Press ( Home ).

2 Select [Setup] , and then press OK .

3 Select [Audio] , and then press OK .

4 Press the Navigation buttons and OK to

select and change:

• [Night Mode] : For quiet listening, decrease

the volume of loud sounds on your home

theater. Night mode is only available for

Dolby-encoded DVD and Blu-ray discs.

• [HDMI Audio] : Set the HDMI audio

output from your TV, or disable HDMI

audio output from the TV.

• [Default sound settings] : Restore the

equalizer settings of all the sound modes

to the default values.

Parental control settings

1 Press ( Home ).

2 Select [Setup] , and then press OK .

3 Select [Preference] , and then press OK .

4 Press the Navigation buttons and OK to

select and change:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comments to this Manuals

No comments