Philips HP6513/00 User Manual download pdf (Page 16)

Problem Possible cause Solution

The appliance is

not switched

on.

Switch on the appliance.

You did not

attach the

epilating

head correctly.

Place the epilating head on the

appliance and press it onto the

appliance until it snaps home

(‘click’).

Skin irritation

occurs.

You used the

epilator for the

rst time or

after a long

period of

disuse.

Some skin irritation may occur the

rst few times you use the

appliance. This is absolutely normal

and usually disappears quickly. For

tips to reduce skin irritation, see

the rst section of chapter ‘Using

the appliance’. Also make sure you

keep the epilating head clean.

You have

applied too

much pressure

to the appliance

Do not use any pressure when

you move the appliance over skin

The leg skin

cooler is not

cold enough.

You did not

freeze the leg

skin cooler long

enough.

Put the skin cooler without the

insulating sleeve in the freezer or

freezing compartment (***) for at

least 4 hours. When the colour of

the uid has changed from white

to completely blue, the skin cooler

is ready for use.

You did not put

the leg skin

cooler in the

freezer or

freezing

compartment.

Put the skin cooler without the

insulating sleeve in the freezer or

freezing compartment (***) for at

least 4 hours. Do not store the

skin cooler in the refrigerator.

ENGLISH16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 111 112

Comments to this Manuals

No comments