Philips MCDB710/05 User Manual download pdf (Page 26)

26

English

DAB Reception

Tuning to DAB for the first time

● Press SOURCE on the front panel of the

system or press FM/DAB on the remote

control repeatedly to select the DAB source.

➜ The system will start a quick scan to search

for all available Band III channels automatically.

➜ If no DAB service is available, “0 service

found” appears on the display panel, followed by

"Service N/A".

➜ If there are available DAB services, the system

will store all detected stations.

➜ At completion of the scanning, the system

will tune to the station in the list.

Notes:

– Make sure you have fully extended the FM/

DAB antenna before tuning to DAB for the first

time.

– Do not press any DAB functional key during

quick scanning. Otherwise, the system will quit the

quick scanning process.

–Wait for the system to complete the quick

scanning process. Otherwise, no DAB station will

be stored for your selection.

Tuning to a station

1 Press ¡1 / 2™ on the front panel of the system

(or 1 / 2 on the remote control) to select the

desired station from the list.

2 Press ÉÅ on the front panel of the system (or

OK/ENTER on the remote control) to

confirm.

➜ “Tuning…” appears on the display panel

when the system tunes to your selected station.

Tuning to a secondary station

Some stations may have one or more secondary

stations associated with them. For such a station,

there is a “>” symbol shown after the station

name.

● Press ÉÅ on the front panel of the system (or

OK/ENTER on the remote control) to switch

between the primary station and secondary

station(s).

Note:

- The system will tune to the primary station

automatically when the secondary station(s) goes

off air.

Re-tuning

By re-tuning, you can update your DAB multiplex

(ensemble) list all over again. At the completion

of scanning, the system will tune to the first

service of the first multiplex (ensemble) in the

updated multiplex (ensemble) list.

● Press and hold SCAN on the front panel of the

system (or MODE/SCAN on the remote

control) for more than 2 seconds.

➜ The system will start full scan to search for all

available Band III channels again automatically.

● Press SCAN on the front panel of the system

(or MODE/SCAN on the remote control)

briefly.

➜ The system will start a quick scan process to

search for Band III channels again automatically.

Manual tuning

1 Press and hold ÉÅ on the front panel of the

system (or OK/ENTER on the remote control)

for more than 2 seconds to enter the manual

tuning mode.

2 Press ¡1 / 2™ on the front panel of the system

(or 1 / 2 on the remote control) to select your

desired DAB channels backward/forward.

3 Press ÉÅ on the front panel of the system (or

OK/ENTER on the remote control) to confirm

and tune to your selected channel.

DAB information display

You can view the DAB service information in the

following 6 information modes. Depending on

the DAB radio station you are tuning to, some

information modes may be unavailable.

● Press DISPLAY/RDS on the remote control

repeatedly to view the following information.

DLS (Dynamic Label Segment)

Is the scrolling text containing such messages as

the title, artist information and news headlines

etc.

Signal strength

Displays the signal strength of the current

station.

pg 020-034_MCDB710_12_Eng 2008.5.23, 10:0626

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

Comments to this Manuals

No comments