Philips MCDB710/05 User Manual download pdf (Page 10)

10

English

IMPORTANT!

– The type plate is located at the

bottom of the system.

–For users in the U.K.: please follow the

instructions on page 2.

– Before connecting the AC power cord

to the wall outlet, ensure that all

other connections have been made.

–Never make or change any

connections with the power switched on.

Step 1: Placing speakers

Front

speaker

( left )

Front

speaker

( right )

VIEWING AREA

Place the front left and right speakers at equal

distances from the TV set and at an angle of

approximately 45 degrees from the listening

position.

Notes:

–To avoid magnetic interference, do not position

the front speakers too close to your TV set.

– Allow adequate ventilation around the DVD

System.

Step 2: Connecting TV

IMPORTANT!

–You only need to make one video

connection from the following options,

depending on the capabilities of your TV.

– Connect the DVD system directly to

the TV.

–A SCART connection allows you to

use features both Audio and Video

features on the DVD Player.

Connections

Using SCART jack

AUDIO

IN

S-VIDEO

IN

VIDEO IN

TV IN

AUDIO

IN

S-VIDEO

IN

VIDEO IN

TV IN

● Use the SCART cable (black) to connect the

DVD Player’s SCART jack to the

corresponding Scart input jacks on the TV (cable

not supplied).

Note:

– Ensure that the “TV” indication on SCART cable

is connected to the TV set and “DVD” indication on

SCART cable is connected to the DVD Player.

Using Composite Video jack

1 Use the supplied composite video connectors

(yellow) to connect the DVD system's VIDEO

OUT jack to the video input jack (or labeled as

A/ V In, CVBS, Composite or Baseband) on the

TV.

2 To hear the TV channels through this DVD

system, use audio cables (white/red) to connect

AUX IN (L/R) jacks to the corresponding

AUDIO OUT jacks on the TV.

pg 001-019_MCDB710_12_Eng 2008.5.23, 10:0610

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 34 35

Comments to this Manuals

No comments