Philips MCDB710/05 User Manual download pdf (Page 11)

English

11

Connections

Using Component Video jacks (Y Pb Pr)

IMPORTANT!

– The progressive scan video quality is

only possible when using Y Pb Pr, and a

progressive scan TV is required.

1 Use component video cables (red/blue/green -

not supplied) to connect the DVD system's Y

Pb Pr jacks to the corresponding Component

video input jacks (or labeled as Y Pb/Cb Pr/Cr or

YUV) on the TV.

2 To hear the TV channels through this DVD

system, use audio cables (white/red) to connect

AUX IN (L/R) jacks to the corresponding

AUDIO OUT jacks on the TV.

3 If you are using a Progressive Scan TV (TV must

indicate Progressive Scan or ProScan capability),

to activate TV Progressive Scan, please refer to

your TV user manual. For DVD system

Progressive Scan function, see “Getting Started-

Setting up Progressive Scan feature”.

Note:

– If your TV does not support Progressive Scan,

you will not be able to view the picture.

Press SYSTEM MENU on the remote to exit the

system menu and then DISC and “1” to exit

progressive scan.

Using S-Video jack

IMPORTANT!

– If S-Video is used for DVD playback

connection, the system’s VIDEO OUT

setting will need to be changed

accordingly.

1 Use an S-Video cable (not supplied) to connect

the DVD system’s S-VIDEO jack to the S-Video

input jack (or labeled as Y/C or S-VHS) on the

TV.

2 To hear the TV channels through this DVD

system, use the audio cables (white/red) to

connect AUX IN (L/R) jacks to the

corresponding AUDIO OUT jacks on the TV.

pg 001-019_MCDB710_12_Eng 2008.5.23, 10:0611

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 34 35

Comments to this Manuals

No comments