Philips SRU7060/10 User Manual download pdf (Page 4)

2 Select the device mode TV with the

SELECT key. Press the SELECT key until the

light around the Standby key lights up.

To select the other devices press the SELECT

key several times until the label of the device

you want to operate, lights up.

If neither the Standby key nor one of the labels light up, check whether

the batteries are properly inserted (see ‘Inserting the batteries’).

3 Check whether all the keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the SRU 7060 is ready for use.

• If the device does not respond at all or not to all of the

key commands, follow the instructions under

‘Setting the remote control’, or for online setup go to:

www.philips.com/urc.

Setting the remote control

This is only necessary if your appliance does not respond to the SRU 7060.

If that is the case, the SRU 7060 does not recognize the brand and/or model

of your appliance and you need to program the remote control to do so.

The example below (TV) instructs you how to do this.

You can repeat the same steps for other appliances (DVD,VCR, etc.) which

you want to operate using the SRU 7060.

Automatically setting the remote control

The remote control will now automatically search for the right code for your

device.

Example TV:

1 Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

• If the device is a DVD-player/recorder or VCR, insert a disk or tape and

start playback.

2 Select the device mode TV with the

SELECT key. Press the SELECT key until the

light around the Standby key lights up.

3 Then keep keys 1 and 3 pressed

simultaneously for three seconds until the

light around the Standby key blinks twice and

then remains lit.

Instructions for use

English

1 2 3 4 5 6 7 8 9 ... 151 152

No comments

Philips SRU7060/10 User Manual Page 4