Philips MCD299/98 Specifications download pdf (Page 12)

12

English

Installation

Step 3: Connecting TV

IMPORTANT!

–You only need to make one video

connection from the following options,

depending on the capabilities of your TV.

– Connect the DVD system directly to

the TV.

Using AV OUT jack

AUDIO

IN

S-VIDEO

IN

VIDEO IN

TV IN

AUDIO

IN

S-VIDEO

IN

VIDEO IN

TV IN

CONNECT TO SUB WOOFER

R

L

SPEAKERS 6 Ω

Y/Pb/Pr OUT

A/V OUT

1 Connect the end of the supplied AV cord with

only one connector to the AV OUT jack of the

DVD system.

2 For the other end, connect the video output

connector (yellow) to the video input jack (or

labeled as A/ V In, CVBS, Composite or

Baseband) on the TV. To hear the sound of this

DVD system through your TV, connect the audio

connectors (white/ red) to the audio input jacks

on the TV.

Using Y Pb Pr OUT jack

IMPORTANT!

– The progressive scan video quality is

only possible when using Y Pb Pr, and a

progressive scan TV is required.

R

CONNECT TO SUB WOOFER

R

L

SPEAKERS 6 Ω

Y/Pb/Pr OUT

A/V OUT

1 Use component video cables (red/blue/green) to

connect the COMPOENT VIDEO

OUTPUT (Pr/Cr Pb/Cb Y) jack to the

corresponding Component video input jacks (or

labeled as Y Pb/Cb Pr/Cr or YUV) on the TV.

2 If you are using a Progressive Scan TV (TV must

indicate Progressive Scan or ProScan capability),

to activate TV Progressive Scan, please refer to

your TV user manual. For DVD system

Progressive Scan function, see "Preparations-

Setting up Progressive Scan feature".

Note:

– If your TV does not support Progressive Scan, you

will not be able to view the picture.

pg001-pg020_MCD299-98-Eng-A 2007.9.27, 13:0412

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 83 84

Comments to this Manuals

No comments