Philips MCD299/98 Specifications download pdf (Page 11)

English

Step 2: Antennas Connection

Connect the supplied MW loop antenna and FM

antenna to the respective terminals. Adjust the

position of the antenna for optimal reception.

MW Antenna

● Position the antenna as far as possible from a TV,

VCR or other radiation source.

FM Antenna

● For better FM stereo reception, connect an

outdoor FM antenna to the FM ANTENNA

terminal.

Installation

Step 1: Connecting speakers

AC CORD

CONNECT TO SUB WOOFER

SPEAKERS 6 Ω

Y/Pb/Pr OUT

A/V OUT

1 Place the main set with the front side facing

down on a flat and firm surface.

2 Connect the two front speaker cables to the

SPEAKERS (6 Ω) terminals: right speaker to

"R" and left speaker to "L".

3 Remove the detachable cover at the left bottom

of the main set to expose the CONNECT TO

SUB WOOFER terminal.

4 Connect the CONNECT TO SUB

WOOFER terminal of the main set to the

CONNECT TO MAIN SET terminal of the

subwoofer with the supplied 15-pin D-Sub cable

by matching the pins. Fix the two screws on the

connectors to ensure firm connection.

5 Mount the detachable cover back until hearing a

click.

Notes:

– Ensure that the speaker cables are correctly

connected. Improper connections may damage the

system due to short-circuit.

–For optimal sound performance, use the

supplied speakers.

– Do not connect speakers with an impedance

lower than the speakers supplied. Please refer to

the SPECIFICATIONS section of this manual.

– The delivery-attached 15-pin D-Sub cable is

intended for use with this system only. Never try it

on any other devices (e.g., do not use it in

connection of your PC).

pg001-pg020_MCD299-98-Eng-A 2007.9.27, 13:0411

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 83 84

Comments to this Manuals

No comments

Philips MCD299/98 Specifications Page 11

Comments to this Manuals

Related products and manuals for Home cinema systems Philips MCD299/98