Philips S231C4AFD/00 User Manual download pdf (Page 4)

2

1

. For your safet

y

 The SMART All-in-One is equipped with

a three-pronged grounded plug, a plug

with a third (grounding) pin. This plug will

fit only into a grounded power outlet as

a safety feature. If your outlet does not

accommodate the three-wire plug, have an

electrician install the correct outlet, or use

an adapter to ground the appliance safely.

Do not defeat the safety purpose of the

grounded plug.

 Unplug the unit during a lightening

storm or when it will not be used for

long period of time. This will protect the

SMART All-in-One from damage due to

power surges.

 Do not overload power strips and

extension cords. Overloading can result in

fire or electric shock.

 Never push any object into the slot

on the SMART All-in-One cabinet. It

could short circuit parts causing a fire or

electric shock. Never spill liquids on the

SMART All-in-One.

 Do not attempt to service the

SMART All-in-One by yourself; opening

or removing covers can expose you to

dangerous voltages and other hazards.

Please refer all servicing to qualified service

personnel.

 To ensure satisfactory operation, use

the SMART All-in-One only with UL

listed computers which have appropriate

configured receptacles marked between

100 - 240V AC, Min. 5A.

 The wall socket shall be installed near the

equipment and shall be easily accessible.

 For use only with the attached power

adapter (Output 19V DC) which have UL,

CSA listed licensed (only for monitor with

power adapter).

Model: ADPC1965

Manufacturer: TPV ELECTRONICS

(FUJIAN) CO., LTD.

Model: ADS-65LSI-19-1 19065G

Manufacturer: SHENZHZEN HONOR

ELECTRONIC CO., LTD.

1.2 Cleaning

 Clean the cabinet regularly with cloth. You

can use soft-detergent to wipe out the

stain, instead of strong-detergent which will

cauterize the product cabinet.

 When cleaning, make sure no detergent is

leaked into the product. The cleaning cloth

should not be too rough as it will scratch

the screen surface.

 Please disconnect the power cord before

cleaning the product.

1.3 Special notes on

SMART All-in-One

The following symptoms are normal with

SMART All-in-One and do not indicate a

problem.

Note

 Due to the nature of the fluorescent light,

the screen may flicker during initial use. Turn

off the Power Switch and then turn it on

again to make sure the flicker disappears.

 You may find slightly uneven brightness

on the screen depending on the desktop

pattern you use.

 The LCD screen has effective pixels of

99.99% or more. It may include blemishes

of 0.01% or less such as a missing pixel or a

pixel lit all of the time.

 Due to the nature of the LCD screen, an

afterimage of the previous screen may

remain after switching the image when the

same image has been displayed for a long

time. The SMART All-in-One will slowly

recover from this.

 When the screen becomes black or

flashing, or cannot illuminate any more,

contact your dealer or service center to

replace parts. Don’t repair the screen by

yourself!

1 2 3 4 5 6 7 8 9 ... 44 45

Comments to this Manuals

No comments