Philips DVP3570-F7 User Manual download pdf (Page 22)

22 EN

LIST OF SETTINGS

Category Menus

Options/Sub-

Menus

Description

Audio Dual mono Stereo This unit allows you to select a sound mode.

L-ch

R-ch

Down Sampling

• When playing back disc with copyright protection, the sound will be

down sampled at 48kHz, even if you set to “Off”.

Set to “On” when outputting in 48kHz.

Set to “Off” when outputting the original sound.

Off

DRC On This function is available only on the discs which are recorded in the

Dolby Digital format.

“On” “

/8” “Off”:

Compress the range between soft and loud sounds.

Off

Effect Normal You can set the reverberation effect.

Normal: no effects (original sound)

Living Room: sounds as if you are in a living room

Hall: sounds as if you are in a hall

Arena: sounds as if you are in an arena

Cave: sounds as if you are in a cave

Concert Hall: sounds as if you are in a concert hall

Bath Room: sounds as if you are in a bath room

Cathedral: sounds as if you are in a cathedral

Living Room

Hall

Arena

Cave

Concert Hall

Bath Room

Cathedral

Digital Out

• Refer to page 10 for

more information.

Bitstream • Set to “Bitstream” when the unit is connected to a Dolby Digital decoder.

• When HDMI cable is connected, make sure “HDMI Audio” setting is

set to “Off” to change the “Digital Out” setting.

“Bitstream”:

Outputs a Dolby Digital signals.

“LPCM”:

Convert the Dolby Digital into LPCM (2 channel).

LPCM

Other Auto Power Off On Set to “On” to turn this unit off automatically after 30 minutes of no use.

Off

HDMI HDMI

Video

Auto You cannot select the video resolutions which are not supported by the

connected TV, except when this unit’s HDMI OUT jack is connected to a

DVI compatible display devices with an HDMI-DVI cable (default is 480p

in such case).

• Video and audio signals may be distorted temporarily when switching

to / from the HDMI output mode.

HDMI Video:

• Auto: HDMI video resolution will be selected automatically depending

on the connected HDMI device. If you want to change the resolution

manually, press [HDMI] repeatedly.

• When you make a selection, the TV monitor temporarily goes blank

and then comes back again. If it does not, press [HDMI] to change the

resolution or press and hold [B (play)] on the front panel for 5 seconds

to change the setting back to its default.

EasyLink (HDMI CEC):

• This feature is available only when the display device is connected with

an HDMI cable, and when it supports EasyLink (HDMI CEC) feature.

• Refer to page 23 for more information.

480p

720p

1080i

1080p

HDMI

Audio

Bitstream

LPCM

Off

EasyLink

(HDMI CEC)

Off

Ratings

Lock

Rating

Level

Off Sets the rating level for the disc playback.

8 [Adult]

7 [NC-17]

6 [R]

5 [PGR]

4 [PG13]

3 [PG]

2 [G]

1 [Kid Safe]

New PIN Sets the new password for the “Ratings Lock” setting.

Factory

Default

Yes “Yes”:

Resets all the settings, except for “Ratings Lock”, in “Settings” to the

factory default.

”No”:

Does not perform the initialization.

Product Info “Product Info” screen provides you with the information on this unit’s

hardware and software version information.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comments to this Manuals

No comments

Philips DVP3570-F7 User Manual Page 22

Comments to this Manuals

Related products and manuals for Video Philips DVP3570-F7