Philips DVP3570-F7 User Manual download pdf (Page 10)

10 EN

CONNECTIONS

• When you change the connections, all devices should be turned off.

• Refer to the manual accompanying external devices for more information.

AUDIO IN

COAXIAL

DIGITAL AUDIO INPUT

stereo system

2 Channel Analog Audio Connection Digital Audio Connection

AV receiver/amplifier

analog audio

input jacks

audio cable

AUDIO OUT DIGITAL AUDIO OUT (COAXIAL)

digital audio coaxial input

jack

digital audio coaxial cable

audio

this unit

Connection to an Audio System

If your TV has antenna in jack only, it is still possible to

connect this unit to your TV by using an RF modulator. In

this case, follow the instructions below.

1) Disconnect the power cords of the devices from the

AC outlet.

2) Make the connection as illustrated below.

3) Set your RF modulator’s channel 3/4 switch to

either 3 or 4, whichever the TV channel is least used in

your area. If your RF modulator has a

modulator / antenna switch, set it according to the

manual supplied with the RF modulator.

Plug in the power cords of the devices to the AC outlet.

5) Turn on your TV and choose the same channel as

you set the RF modulator’s channel 3/4 switch to.

For more details, follow the manual supplied with the

RF modulator.

rear of TV

rear of your RF

modulator

AUDIO IN TO TVANT. IN

CHANNEL

VIDEO IN

ANT. IN

Set channel 3 or 4

rear of this unit

RF coaxial cable

RF coaxial

cable

VHF / UHF

antenna

cable TV

company

video cable

audio cable

Note:

• RF modulator is not supplied with this unit. You need to

purchase it at your local store.

• The quality of picture may become poor if this unit is

connected to an RF modulator.

Connecting to RF Modulator (Not Supplied)

Note:

• The audio source on a disc in a Dolby Digital multi-channel

surround format cannot be recorded as digital sound by an

MD or DAT deck.

• By hooking this unit up to a Dolby Digital decoder, you can

enjoy high-quality Dolby Digital multi-channel surround

sound as heard in the movie theaters.

• Playing back a DVD using incorrect settings may generate

noise distortion and may also damage the speakers.

• “Digital Out” setting is not available while HDMI audio is

output.

* To complete these settings, refer to pages 22.

Setup > Audio>

Digital Out

Connecting to a Dolby Digital decoder

for Dolby Digital audio output.

Bitstream

Connecting to the other device

(an MD deck or DAT deck etc.)

without Dolby Digital decoder.

LPCM

Connection

Setting

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments

Philips DVP3570-F7 User Manual Page 10

Comments to this Manuals

Related products and manuals for Video Philips DVP3570-F7