Philips 32PFL3505D/F7 Service Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
8-5 PL10.3TR
[ Video Signal Section ]
No
Is the "L" pulse sent out Pin(1) ter
minal of remote
control receiver (RS101) when the infrared remote
control is activated?
Check the line between Pin(1) terminal of remote
control receiver(RS101) and Pin(25) of CN301,
and service it if defective.
Ye s
Is the "L" pulse supplied to Pin(25
) of CN301?
Ye s
Is 3.3V voltage supplied to Pin(2) terminal of the
remote control receiver (RS101)?
No
FLOW CHART NO.2
Operation is pos
sible from the remote control unit.
Check AL+3.3V line and service it if defective.
No
Replace the remote control receiver(RS101)
or the remote control unit.
Ye s
Replace Digital Main CBA Unit.
When pressing each switches (SW101B, SW103B~
SW107B) do the voltage of Pin(29) of CN302 ?
Ye s
The key operation is not functioning.
FLOW CHART NO.1
Are the contact point and installation state of the key
switches (SW101B, SW103B~SW107B) normal?
Re-install the switches (SW101B, SW103B~SW107B)
correctly or replace the poor switch.
Check the switches (SW101B, SW103B~SW107B)
and their periphery, and service it if defective.
Ye s
Replace Digital Main CBA Unit.
No
No
No operation is possible from the remote control unit.
Picture does not appear normally.(Video input)
FLOW CHART NO.3
Are the video signal i
nputted to Pin(4) of CN302?
Ye s
Check the line between Pin(4) of CN302 and
JK752, and service it if defective.
No
Replace Digital Main CBA Unit or LCD Module
Assembly.
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 107 108

Comments to this Manuals

No comments