Philips DVDQ40/002 Specifications

A-trend AD-L528 With the draw closed, and with no disc in it. Press 7,6 and select on the remote, and this will take you into the firmware settings,

VER 2 = region 2. Also, you can select Version 255, which is region auto select. Then you press set-up twice, and insert the disc. It should work lik

CyberHome AD-M 212 When entering the Set-up menu via de [SELECT] - [7] - [6] - [ENTER], enter 13 for the region code and make it not only region cod

Turn DVD on. Open the tray; do not put a disc inside. Press SETUP on the remote control. From the menu, choose PARENTAL CONTROL with the arrows on the

Daewoo DVG-5000N See http://www.nerd-out.com/darrenk/ for instructions Daewoo DVG-6000D Code 1 Put a region 1, 2, 3, or 4 and so on into the playe

Dantax DVD1500 Open the cd tray, Type 9999x, where x is the region. Close the cd tray. Dantax DVD450 Eject disc, Press 7 7 select on remote. This

Look at the Hack of Mustek V560 Eclipse DVD-595 Type 770 enter on the remote when in standby with no disc in machine. This gives you access to a menu

Encore DV450 Multiregion: press set-up and type 38883 on remote. Macrovision Hack: Enter SETUP (via remote) then enter 590419 to enter "loop ho

GE Digital 5803P, GE Digital GE1101 http://www.nerd-out.com/darrenk/ GE Digital GE1105P, GE Digital GE1106P 1. Power on your player 2. Press sto

Goodmans GDVD 100 With no DVD/cd in the tray press set-up->menu->step->prev->next gives access to a secret menu. Region bypass can be a

Open the drive tray, Press the buttons 8, 9, 2 and 6 on your remote control, and Press the button 9 on your remote control for Region Free, 1 for Regi

Press Down key twice Ver 4001 = macrovision enable Ver 4000 = macrovision disable Press left (<) or right (>) key Acoustic Solutions DVD551

Grundig GDV 110 Grundig GDV 130 Open your DVD-drive, and press this on your Remote: SETUP - 9 - 2 - 0 - 0 - 0 - STEP - SCHUFFLE – NEXT Macrovisio

remote. 3. Press Play on the remote. Your player is now a region 2 only player. To reset the machine to factory defaults, do the following: 1. Pr

scroll down the list. 16. Select the word "none" to make your unit region free. 17. The warning you see is probably meant to do nothin

Haier HD700 See http://www.nerd-out.com/darrenk/ for instructions Harman Kardon DVD1 Region code hack: With no DVD inserted put the player into ST

or 3.Press number button sequence "7","9","2","8" and "0" to turn ON Macrovision protection enabl

38767 o "02" should appear in the top left corner, this is the current region code. Press 9 on your remote and you are now region free.

To change the region code of this player just open the DVD tray and press 1 four times on the remote control followed by selecting desired region code

When the display reads 000 5858 use the up and down buttons to change the 000 to 02E. Using the Left and Right arrow buttons, change the last four dig

Kenwood DVF-3530 Select the "set-up" menu by pressing the Menu button. Select "Audio" by pressing >. Select "Other&qu

Already region free, but here’s how to do the hack for RCE protected DVD movies! First load movie until you reach the Protected Notice World MAP. Th

Plug the power into the unit but keep it turned off ("OFF" should be on display). Press and hold "MENU" button on unit, while ho

down right Lenco DVD-02 Put on the DVD open the tray. Type in the code 330880 after every number you have to wait until the hand disappears. Now

No cd/DVD in player, press the menu key then, press key no 1, press key no 6, press key no 7, press the key "mute". After you pressed these

Maplin SMC-MK1 Open the tray, Press 7, Press Enter, Press 7, a service menu will now appear enabling you to change the region using the country c

Mediencom DS-8302 Open tray, Type 8 4 2 1 on your remote control -> OSD changes, to region code, Select desired region code (9=all regions) with &

press SETUP, IN the Front Panel :, press NEXT, press STOP, press PAUSE/STEP , press PREV, press NEXT. Mustek DVD-V560 Make sure no disc is in tra

Press power+dimmer+previous (|<) all together the display’s shows _ _ _ _ . Press in sequence 1 9 9 9, the display shows A-0000 D-01 and Enter reg

Switch on machine press open/close button, stop button, and forward search button all at the same time for 3-4 seconds and a hidden menu will appear,

Remove the disc and close the disc tray. Press STOP STOP SETUP 3 8 8 8 3 and choose the region. Philco DV-P2100 Open tray, Press 8926 ("*"

on the remote (0=AUTO, 1,2,...=set region). Press, "PAUSE" on the remote. Power the player off, and then back on Philips DVD 707 Power on

Philips DVD950 Turn the machine ON and remove any discs. When the display shows 'NO DISC'. Enter 'Play', '159'. The d

Code 1; Turn on player, Insert any disc. Open the lid and take out the disc and close the lid. Immediately press [Stop], wait few seconds. Press 8,7,X

Turn on the DVD player, eject the drive and enter the following code: 8926. Then press the number that corresponds to the region you want to play or

Without any disc in player press, Setup, Mute, Last, Next on the RC. Choose region RCA DRC220N Press menu, 1,6,7 then mute to play all regions R

Roadstar DVD-2027H Open the drive tray. Make sure there's no DVD in it then Type 9 8 1 7 or 8 4 2 1 on the remote keypad. You will then be

(Auto/Off). Chose "Bypass". Press "Setup" again. The player is now region- and Macrovision-free. Sampo DVE-611 Create a txt f

will now be superimposed over the Samsung logo on your TV screen - this number represents the current region setting of the player (e.g. for region 2

Using the AIWA remote control. Press Repeat (DVD player's display will be totally light.)Press Program. Press Clock several times (usually 2) and

turn it off, every time you turn it on, you must do all the steps again to be able to see other region movies. Samsung DVD S224 Turn DVD player on w

OPEN, SETUP, x, 2, 0, 1, 0, STEP, SHUFFLE, NEXT. Where x is: 1 for Region 1, 2 for Region 2 … 9 for multi-region Macrovision hack; SETUP, STEP, TITL

When the player shows the map screen and say "cannot play on modified region 1 players". When this screen appears, you must press the "

Skyworth 650 Open cd drawer, Key in (using remote) 8926# (# = region code number i.e. 1,4 etc. 0 = multi region and no macrovision) SM Supervision 1

Code 1; Power on the player. Press, "pause" on remote. Enter code "314159". Player display reads "COdE - -" Enter 0 an

Open the tray. Press 7,7, Select. A service menu will now appear. Scroll down to "Country Code" and press SELECT on the remote. Change the s

Sony DVP-NS300, Sony DVP-NS305, Sony DVP-NS400D, Sony DVP-NS700, Sony DVP-S330, Sony DVP-S335, Sony DVP-S360, Sony DVP-S336, Sony DVP-S525D, So

Sunny DVD-650 Open the tray. Enter 8926 then press region number that you want (9 for multi region). Insert your DVD in drive and close the tray.

Press the 9 button on your remote control for Region free, or 1 – 6. Press the Open button on your player. Press the Standby button on your remote con

Hold Stop, Turn on, Press open/close and Skip(=>>) at the same time. Select region on the menu that appears United DVD 2151 Make sure you

Vtrek DVD-9901B Open the DVD-Drive, On the remote enter the Code "2168+Regioncode(1-6)" and Close the DVD-Drive. Wharfedale 750 Open dr

Yukai DVD-V300 This is the same hack as Mustek DVD V300 because the players are the same. Yukai DVD-V560 Power up DVD without a disk. Press set-

Download the zipped MACRO/REGION FREE Firmware file. Make sure you get the one for the 1100w-1MB player. 1. If the archive does not contain a file n

11. The drive will eject the disk (screen will go blank)Picture (Remove the disk) 12. The player will power off (screen is still blank)Picture 13. U

Press the Open/Close button on your remote control to open the tray. Press the buttons 1, 1, 1 and then 1 on your remote control, in order, one at ti

Is the same hack as Mustek DVD V300 because the players are the same. Bluesky DS-8315 Open the drawer of the reader via the remote control. Press s