Instruction Manual Flat Panel Display Wall Mount Bracket
7
Group 2 Installation Procedures
WARNING: You must use proper attaching hardware and
installation procedures. Failure to use proper
attaching hardware and installation procedures
may result in equipment damage or serious per-
sonal injury.
Attach Interface Brackets
1. Identify and select parts bags labeled B and E.
2. Remove Nylon spacers from the parts bag labeled E.
3. Place eight 3/8” Nylon spacers over the mounting holes on
your display (see Figure 6).
4. Place the interface brackets over the Nylon spacers (see
Figure 6 and Figure 7).
5. Select the parts bag labeled B.
CAUTION: Overtightening mounting screws may damage your
display.
6. Using the hardware in the parts bag labeled B, attach the inter-
face brackets to your display (see Figure 6 and Figure 7). Do
not overtighten the mounting screws.
Figure 6. Spacer Installation for Group 2
ATTACH MOUNTING BRACKETS
USING THESE HOLES
Figure 7. Bracket Attachment for Group 2
Comments to this Manuals