6
Instruction Manual Universal Flat Panel Display Wall Mount Bracket
DETERMINE BRACKET INSTALLATION PROCEDURES
Group 1 Installation Procedures
WARNING: You must use proper attaching hardware and
installation procedures. Failure to use proper
attaching hardware and installation procedures
may result in equipment damage or serious per-
sonal injury.
Attach Interface Brackets
1. Identify and select the parts bags labeled D and E.
2. Remove the Nylon spacers from the parts bag labeled E.
3. Place six 3/8” Nylon spacers over the mounting holes on your
display (see Figure 4).
4. Place the interface brackets over the Nylon spacers (see
Figure 4 and Figure 5).
5. Select the parts bag labeled D.
CAUTION: Overtightening mounting screws may damage your
display.
6. Using the hardware in the parts bag labeled D, attach the inter-
face brackets to your display (see Figure 5). Do not overtighten
the mounting screws.
ATTACH MOUNTING BRACKETS
USING THESE HOLES
Figure 4. Spacer Installation for Group 1
Figure 5. Bracket Attachment for Group 1
Comments to this Manuals