Philips 30PF9946/37 User Manual download pdf (Page 14)

Instruction Manual Flat Panel Display Wall Mount Bracket

Group 8 Installation Procedures

WARNING: You must use proper attaching hardware and

installation procedures. Failure to use proper

attaching hardware and installation procedures

may result in equipment damage or serious per-

sonal injury.

Attach Interface Brackets

1. Identify and select the parts bags labeled C and E.

2. Remove the Nylon spacers from the parts bag labeled E.

3. Place Nylon spacers over the mounting holes on your display.

4. Place the interface brackets over the Nylon spacers (see

Figure 18 and Figure 19).

5. Select the parts bag labeled E.

CAUTION: Overtightening mounting screws may damage your

display.

6. Using the hardware in the parts bag labeled C, attach the inter-

face brackets to your display in the proper holes in each inter-

face bracket (See Figure 18 and Figure 19). Do not overtighten

the mounting screws.

Figure 18. Spacer Installation for Group 8

Figure 19. Bracket Attachment for Group 8

ATTACH MOUNTING BRACKETS

USING THESE HOLES

1 2 ... 9 10 11 12 13 14 15 16

No comments

Philips 30PF9946/37 User Manual Page 14