Philips HR1945/80 User Manual download pdf (Page 7)

ENGLISH

Before rst use

Thoroughly clean all parts before you use the appliance for the rst time (see

chapter ‘Cleaning’).

Note: Make sure all parts are completely dry before you start using the appliance.

Preparing for use

Assembling the juicing unit

1 Attach the pulp outlet to the juicing unit and turn it clockwise until the arrow

(

) points to the ‘locked’ indication. (Fig. 2)

2 Insert the juicing screw into the juicing unit (Fig. 3).

3 Assemble the two parts of the lter (Fig. 4).

4 Place the two-part lter over the juicing screw (Fig. 5).

Tip: Use the black two-part filter for clear juice. If you prefer cloudy juice with

more fibres in it, use the grey two-part filter.

5 Attach the spout to the juicing unit and turn it clockwise until the arrow (

)

points to the ‘locked’ indication. (Fig. 6)

Important: Do not attach or detach the spout when the juicing unit is mounted on

the motor unit. Always take o the juicing unit from the motor unit before

assembling or disassembling.

6 Place the berry tray on the feeding tube (Fig. 7).

Placing the juicing unit onto the motor unit

1 Place the assembled juicing unit onto the motor unit, with the pulp outlet

tting into the opening on the motor unit (Fig. 8).

2 Align the projections on the juicing unit with the recesses in the motor unit.

Slide the juicing unit onto the motor unit until it locks into place. (Fig. 9)

3 Press the juicing unit onto the motor unit (1) and then close the locking clamp

(2). (Fig. 10)

Note: If the locking clamp cannot be closed, check if the juicing unit is positioned

properly with the projections on the juicing unit into the recesses of the motor

unit.

4 Slide the pulp container into the motor unit (Fig. 11).

1 2 3 4 5 6 7 8 9 10 11 12 ... 57 58

No comments

Philips HR1945/80 User Manual Page 7