Philips HR1945/80 User Manual download pdf (Page 10)

ENGLISH

Troubleshooting

This chapter summarises the most common problems you could encounter with the

appliance. If you are unable to solve the problem with the information below, visit

www.philips.com/support for a list of frequently asked questions or contact the

Consumer Care Centre in your country.

Problem Solution

The appliance does not

work.

The appliance is equipped with two safety pins. If either

the juicing unit or the pulp container has not been

placed on the motor unit properly, the appliance does

not work. Check whether these parts have been

assembled in the right way (see chapter ‘Preparing for

use’).

The motor unit gives o

an unpleasant smell

the rst few times the

appliance is used.

This is not unusual. If the appliance continues to give o

this smell after a few times, check the quantities you are

processing and the processing time.

The juicing unit cannot

be placed onto the

motor unit.

Check if the spout is properly attached to the juicing

unit. Make sure that the projections on the juicing unit

are aligned with the recesses in the motor unit (see

g. 9).

The juicing unit is

blocked.

Press the pre-clean button for a few seconds. If the

juicing unit is still blocked, then switch o the appliance,

remove the juicing unit and disassemble all parts.

Remove the fruit that is blocking the juicing unit. Then

process a smaller quantity.

The power-on light

ashes. (HR1942,

HR1943, HR1944,

HR1946, HR1947,

HR1949 only)

The juicing unit is blocked. Press the pre-clean button

for a few seconds. If the juicing unit is still blocked, then

switch o the appliance, remove the juicing unit and

disassemble all parts. Remove the fruit that is blocking

the juicing unit. Then process a smaller quantity.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 57 58

Comments to this Manuals

No comments

Philips HR1945/80 User Manual Page 10

Comments to this Manuals

Related products and manuals for Juice makers Philips HR1945/80