Philips GC9650 User Manual download pdf (Page 10)

TURBO setting

You can use the TURBO setting for faster ironing and a higher amount of

steam. You can also use it for vertical ironing.

Note: As the TURBO function produces a high amount of steam, the supply

hose may become hotter than at the OptimalTemp and ECO settings.

This is normal.

1 Press and hold the on/off button for 2 seconds until the light turns

white.

, The‘ironready’lightontheironandthewhiteTURBOlightinthe

on/offbuttonstarttoashtoindicatethattheironisheatingupto

theTURBOsetting.Thistakesupto2minutes.

2 Toswitchbacktothe‘OptimalTemp’setting,pressandholdthe

on/off button for 2 seconds until the light turns blue again.

Safety auto-off mode

- To save energy, the appliance switches off automatically when it has not

been used for 10 minutes. The auto-off light in the on/off button starts

to ash.

- To activate the appliance again, press the on/off button. The appliance

then starts to heat up again.

Note: The appliance is not switched off completely when it is in auto-off mode.

To switch off the appliance, press the on/off button.

Cleaning and maintenance

To properly maintain your appliance, clean the iron and the appliance

regularly.

1 Cleantheappliancewithamoistcloth.Toremovestubbornstains,

youcanuseasmallamountofwashing-upliquid.

2 Toeasilyandeffectivelyremovestainsfromthesoleplate,switchon

the appliance and let it heat up. When the appliance has heated up,

move the iron over a moist cloth while you press the steam trigger.

Tip: Clean the soleplate regularly to ensure smooth gliding.

2 sec.

ENGLISH10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 65 66

No comments

Philips GC9650 User Manual Page 10