Philips GC4415 User Manual download pdf (Page 8)

- 2 for wool

- 3 for cotton

- MAX for linen

If you do not know what kind or kinds of fabric an article is made of, determine the right ironing

temperature by ironing a part that will not be visible when you wear or use the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.

To prevent stains, do not use the spray function.

Start ironing the articles that require the lowest ironing temperature, such as those made of synthetic bres.

4 Plug in the appliance. If the appliance has an earthed plug, put the mains plug in an earthed

wall socket.

, The amber temperature light goes on.

5 When the amber temperature light has gone out, wait a while before you start ironing.

The temperature light goes on from time to time during ironing.



Note: The iron may give off some smoke when you use it for the rst time. This stops after a short while.

Steam ironing

1 Make sure that there is enough water in the water tank.

2 Settherequiredironingtemperature(seechapter‘Preparingforuse’,section‘Settingthe

temperature).

3 Set the appropriate steam setting. Make sure that the steam setting you select is suitable for

thesetironingtemperature:(Fig.7)

- 1 - 3 for moderate steam (temperature settings 2 to 3)

- 4 - 6 for strong steam (temperature settings 3 to MAX)

Note: The iron starts to produce steam as soon as it reaches the set temperature.

Note: If the set ironing temperature is too low (MIN to 2), water may drip from the soleplate

(see chapter ‘Features, section ‘Drip stop’).



When you use the Ionic DeepSteam function during steam ironing, the steam produced is ner than

during regular steam ironing. Fine steam reaches deeper, especially into thick fabrics. This helps you

to remove stubborn creases easily.

1 Followsteps1to3insection‘Steamironing’.

2 Press and hold the Ionic DeepSteam button (Fig. 8).

, The Ionic DeepSteam light goes on and you hear a humming sound. (Fig. 9)

3 The iron now produces Ionic DeepSteam to help you remove even the toughest creases.

Note: The Ionic DeepSteam function is only effective when it is used in combination with a steam setting

and a temperature setting between 2 and MAX.

Note: Do not use the Ionic DeepSteam function when you iron without steam and/or at low temperature

settings. However, ironing at low temperatures without steam with the Ionic DeepSteam function

switched on will not damage the iron.

Note: The Ionic DeepSteam output may vary from time to time, depending on the ironing temperature.

Ironing without steam

1 Set the steam control to position 0 (= no steam) (Fig. 2).

ENGLISH8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 131 132

Comments to this Manuals

No comments

Philips GC4415 User Manual Page 8

Comments to this Manuals

Related products and manuals for Irons Philips GC4415