Philips AC3829/10 User Manual download pdf (Page 16)

14 EN

Note

• Make sure that the pre-lter is

completely dry. If it is still wet,

bacteria may multiply in it and

shorten the lifetime of the pre-lter.

5 After the pre-lter is completely dry,

place it back into the back panel

(g h).

6 Touch and hold for 3 seconds to

reset the pre-lter cleaning time.

Descaling the

NanoCloud rotary

humidication wick

Filter alert light

status

Follow this

F0 displays on the

screen and wick&

pre-lter cleaning

alert goes on

Descale the

NanoCloud

rotary

humidication

wick

1 Pull out the water tank (g j).

2 Lift the water tray upwards and pull

it out horizontally (g k).

3 Take the wick wheel o the wick

support (g †).

4 Soak the NanoCloud rotary

humidication wick in cleansing

agent (e.g diluted white vinegar,

Citric acid solution) for two hours

(g ˆ).

Note

• When placing the wick wheel on the

wick support, make sure that the

projections on the wick wheel falls

into the corresponding grooves.

7 Place the water tray back into the

appliance (g n).

8 Place the water tank back into the

appliance (g r).

Cleaning the pre-lter

Note

• If the pre-lter is damaged, worn or

broken, do not use. Visit

www.philips.com/support or

contact the Consumer Care Center

in your country.

Filter alert light

status

Follow this

F0 displays on the

screen and wick&

pre-lter cleaning

alert goes on

Clean the pre-

lter

1 Pull the top part of the back panel

towards you to release it from the

appliance (g c).

2 To remove the pre-lter, press the

two clips down and pull the lter

towards you (g d).

3 Wash the pre-lter under a running

tap. If the pre-lter is very dirty, use

a soft brush to brush away the dust

(g ‡).

4 Air dry the pre-lter.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 233 234

Comments to this Manuals

No comments