Philips HTS3251 Specifications download pdf (Page 29)

29

English

Sound

No sound from home theater speakers.

• Connect the audio cable from your home

theater to your TV or other devices. You do

not need a separate audio connection when

the home theater and TV are connected

through an HDMI ARC connection.

• Set up the audio for the connected device

(see ‘Set up audio for connected devices’ on

page 12).

• Reset your home theater to its factory

settings (see ‘Apply factory settings’ on page

24), then switch it off and switch on again.

• On your home theater, press SOURCE

repeatedly to select the correct audio input.

Distorted sound or echo.

• If you play audio from the TV through the

home theater, make sure that the TV is

muted.

Audio and video are not synchronized.

• 1) Press SOUND SETTINGS. 2) Press

the Navigation buttons (left/right) to select

AUD SYNC, and then press OK. 3) Press

the Navigation buttons (up/down) to

synchronize the audio with the video.

Play

Cannot play a disc.

• Clean the disc.

• Make sure that the home theater supports

the type of disc (see ‘Media formats’ on

page 26).

• Make sure that the home theater supports

the region code of the disc (see ‘Region

codes’ on page 26).

• If the disc is a DVD±RW or DVD±R disc,

make sure that it is nalized.

CannotplayaDivXle.

• Make sure that the DivX le is encoded

according to the ‘Home Theater Prole’

with the DivX encoder.

• Make sure that the DivX le is complete.

DivX or RMVB/RM subtitles do not display

correctly.

• Make sure that the subtitle le name is the

same as the movie le name (see ‘Subtitles’

on page 17).

• Select the correct character set: 1) Press

OPTIONS. 2) Select [Character Set].

3) Select the supported character set.

4) Press OK.

9 Troubleshooting

Warning

•

Risk of electric shock. Never remove the

casing of the product.

To keep the warranty valid, never try to repair the

product yourself.

If you have problems using this product, check the

following points before you request service. If you

still have a problem, register your product and get

support at www.philips.com/welcome.

Main unit

The buttons on the home theater do not work.

• Disconnect the home theater from the

power supply for a few minutes, then

reconnect.

Picture

No picture.

• Make sure that the TV is switched to the

correct source for the home theater.

No picture on a TV connected through HDMI.

• Make sure that the HDMI cable is not faulty.

If it is faulty, replace it with a new cable.

• Press (Home) and then 731 on the

remote control to restore the default

picture resolution.

• Change the HDMI video setting, or wait for

10 seconds for auto recovery (see ‘Picture

resolution’ on page 22).

Discdoesnotplayhigh-denitionvideo.

• Make sure that the disc contains high-

denition video.

• Make sure that the TV supports high-

denition video.

• Use an HDMI cable to connect to the TV.

EN

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments