Philips HTS3251 Specifications download pdf (Page 13)

13

English

1 Connect the home theater to a network

router through a wired connection (see

‘Wired connection’ on page 13).

2 Turn on your TV, and switch to the correct

source for the home theater.

3 Press (Home).

4 Select [Setup], and then press OK.

5 Select [Network] > [Network Installation]

> [Wired (Ethernet)], and then press OK.

6 Follow the instructions on the TV to

complete the setup.

» The home theater connects to the

internet. If connection fails, select [Retry],

and then press OK.

7 Select [Finish], and then press OK to exit.

Check wired network settings

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Network] > [View Network

Settings], and then press OK.

» The current network settings are

displayed.

Internet

Connect your home theater to the internet and

enjoy:

• BD-Live applications: Access exclusive

services from the BD-Live enabled Blu-ray

discs (see ‘BD-Live on Blu-ray’ on page 16).

• Software update: update the home theater

software through the network (see ‘Update

software through the Internet’ on page 25).

Caution

•

Before you try to connect the home theater

to a computer network, familiarize yourself

with the network router and networking

principles. If necessary, read documentation

that accompanies the network components.

Philips is not responsible for lost, damaged, or

corrupt data.

Wired connection

Connect your home theater to your router

through a network cable.

What you need

• A network router (with DHCP enabled).

• A network cable (RJ45 straight cable).

• For BD-Live application and software

update, make sure that the network router

has access to the Internet and the rewall is

disabled.

Set up the wired network

Connect your home theater to your router as

shown below, and then switch on the devices.

LAN

www

EN

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 34 35

Comments to this Manuals

No comments