Philips HTS3251 Specifications download pdf (Page 25)

25

English

Update software through USB

What you need

• A USB ash drive, with at least 75MB of

memory. The USB ash drive must be FAT

or NTFS formatted. Do not use a USB hard

drive.

• A computer with Internet access.

• An archive utility that supports the ZIP

le format (for example, WinZip® for

Microsoft® Windows® or Stuft® for

Macintosh®).

Step 1: Download the latest software

1 Connect a USB ash drive to your

computer.

2 In your web browser, go to www.philips.

com/support.

3 At the Philips Support website, nd your

product and locate the Software and

drivers.

» The software update is available as a zip

le.

4 Save the zip le in the root directory of

your USB ash drive.

5 Use the archive utility to extract the

software update le in the root directory of

the USB ash drive.

» The les are extracted under the UPG_

ALL folder of your USB ash drive.

6 Disconnect the USB ash drive from your

computer.

7 Update software

To continue to get the best features and support

for your home theater, update the software

regularly. Compare the version of your current

software with the latest version on

www.philips.com/support.

Check software version

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Advanced] > [Version Info.], and

then press OK.

» The software version is displayed.

Update software through the

Internet

1 Connect your home theater to the network

through a wired connection (see ‘Set up the

wired network’ on page 13).

2 Press (Home).

3 Select [Setup], and then press OK.

4 Select [Advanced] > [Software Update] >

[Network].

» If an upgrade media is detected, you are

prompted to start or cancel the update.

5 Follow the instruction on the TV to conrm

the update.

» When the software update is complete,

the home theater automatically switches

off and restarts. If it does not, disconnect

the power cord for a few seconds and

then reconnect it.

Note

•

If the home theater cannot connect to the

Philips server, press

(Home).

• Select [Setup] > [Network] > [Network

Installation] to set up the network.

EN

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 34 35

Comments to this Manuals

No comments