Philips MCD289/12 User Manual download pdf (Page 31)

30 EN

The aspect ratio of the TV screen cannot be

changed even though you have set the TV

display format.

The aspect ratio if ﬁ xed on the loaded •

DVD disc.

The aspect ratio may not be changed for •

some TV systems.

No sound or poor sound.

Adjust the volume.•

Disconnect the headphone.•

Ensure the wireless subwoofer is •

connected.

Remote control does not work.

Before pressing any function button, ﬁ rst •

select the correct source with the remote

control instead of the main unit.

Reduce the distance between the remote •

control and the Micro System.

Insert the battery with its polarities (+/– •

signs) aligned as indicated.

Replace the battery.•

Aim the remote control directly at the •

sensor on the front of the Micro System.

Disc does not play.

Insert a readable disc and ensure that the •

label side faces outwards.

Check the disc type, color system and •

regional code. Check for any scratches or

smudges on the disc.

Press •SYSTEM MENU to exit the system

setup menu.

Disable the password for parental control •

or change the rating level.

Moisture has condensed inside the •

system. Remove the disc and leave the

system turned on for about an hour.

Disconnect and reconnect the AC power

plug, and then turn on the system again.

As a power-saving feature, the system •

turns off automatically 15 minutes after

disc play reaches the end and no control

is operated.

Poor radio reception.

Increase the distance between the system •

and your TV or VCR.

Fully extend the FM antenna.•

Connect an outdoor FM antenna instead.•

11 Troubleshooting

Note

Never remove the casing of this system. •

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

system, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site (www.

Philips.com/support). When you contact Philips,

ensure that your Philips is nearby and the model

number and serial number are available .

No power.

Ensure that the AC cord of the apparatus •

is connected properly.

Ensure that there is power at the AC •

outlet.

As a power-saving feature, the system •

switches off automatically 15 minutes

after track play reaches the end and no

control is operated.

No disc detected.

Insert a disc.•

Check if the disc is inserted upside down.•

Wait until the moisture condensation at •

the lens has cleared.

Replace or clean the disc.•

Use a ﬁ nalized CD or correct format disc.•

No picture.

Check the video connection.•

Turn on the TV to the correct Video-In •

channel.

Progressive scan is activated but the TV •

does not support progressive scan.

Black and white or distorted picture.

The disc does not match the TV color •

system standard (PAL/NTSC).

Sometimes a slight picture distortion may •

appear. This is not a malfunction.

Clean the disc.•

A distorted picture may appear during •

progressive scan setup.

1 2 ... 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments