Philips MCD289/12 User Manual download pdf (Page 15)

14 EN

1 In active, standby or Eco Power Standby

mode, press and hold

on the unit for

three seconds.

» [PAIRING] ﬂ ashes on the display

screen.

2 Press and hold the PAIR button on the

rear of the subwoofer for three seconds.

If the connection succeeds, » [PAIR

OK] is displayed and both the blue

and green LED indicators on the

subwoofer turn on.

If the connection fails or the »

connection cannot be set up

successfully within 60 seconds, [PAIR

FAIL] and only the blue LED indicator

on the subwoofer turns on.

Note

If the wireless connection fails again, check whether •

there is any conﬂ ict or strong interference (for

example, interference from other electronic devices)

around your location. After removal of the conﬂ ict or

strong interference, repeat the above procedures.

Switch to standby mode

1 In the active mode, press STANDBY-

ON/ECO POWER to switch the unit to

normal standby mode.

The clock appears on the display panel.»

2 In the normal standby mode, press

STANDBY-ON/ECO POWER for 3

seconds or more to switch the unit to

Eco Power Standby mode.

The ECO POWER LED is on.»

3 In the Eco Power Standby mode, press

STANDBY-ON/ECO POWER for 3

seconds or more to switch the unit to

normal standard mode.

Note

If you do not press any button within 15 minutes after •

a disc stops displaying, the unit switches to Standby

mode automatically.

Find the correct viewing

channel

Press to turn on the unit.

2 Press DISC to switch to disc mode.

3 Turn on the TV and switch to the correct

video-in channel in one of the following

ways:

Go to the lowest channel on your •

TV, then press the Channel Down

button until you see the Philips

screen.

Press the source button repeatedly •

on the remote control of your TV.

Tip

The video-in channel is between the lowest and •

highest channels and may be called FRONT, A/V IN,

VIDEO, HDMI etc. See the TV user manual on how to

select the correct input on the TV.

Select the correct TV system

Change this setting if the video does not appear

correctly. By default, this setting matches the

most common setting for TVs in your country.

1 Press SYSTEM MENU .

2 Select [Preference Page] .

3 Select [TV Type] and then press .

4 Select a setting and then press OK .

• [PAL] - For TV with PAL color

system.

• [Multi] - For TV that is compatible

with both PAL and NTSC.

• [NTSC] - For TV with NTSC color

system.

5 To exit the menu, press SYSTEM MENU .

Note

When the HDMI cable is connected, the • [TV Type]

option is unavailable.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 32 33

Comments to this Manuals

No comments

Philips MCD289/12 User Manual Page 15

Comments to this Manuals

Related products and manuals for Home audio sets Philips MCD289/12