EN 21
English
• [Interlace] – For ordinary TV: turn
on the interlace mode.
[Picture Setting]
Customize picture color settings.
Preference setup
On [Preference Page] , you can set the following
options:
[TV Type]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
• [PAL] - For TV with PAL color
system.
• [Multi] - For TV that is compatible
with both PAL and NTSC.
• [NTSC] - For TV with NTSC color
system.
[Audio]
Select the preferred audio language for disc play.
[Subtitle]
Select the preferred subtitle language for disc play.
[Disc Menu]
Select the preferred disc menu language.
Note
If the language you have set is not available on the disc, •
the disc uses its own default language.
For some discs, the subtitle/audio language can only be
•
changed from the disc menu.
[Parental]
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
1 Press / to highlighten [RATING] .
2 Press to enter the submenu.
3 Select a rating level, then press OK .
4 Press the numeric keys to enter the
password.
• [Off]
• [Concert]
• [Living Room]
• [Hall]
• [Bathroom]
• [Cave]
• [Arena]
• [Church]
[HDCD]
When you play a HDCD (High Defi nition
Compatible Digital) disc, select the audio
output cutoff frequency.
You can select from the following options:
• [Off]
• [44.1K]
• [88.2K]
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
• [On] – enjoy quiet viewing at night
(DVDs only).
• [Off] – enjoy surround sound with
its full dynamic range.
Video setup
On [Video Setup Page] , you can set the
following options:
[Component]
Set the video output according to the video
connection. If the composite connection is
used, this setting is not required.
• [S - Video] – If the S-Video
connection is used, select this option.
• [Pr/Cr Pb/Cb Y] – If the component
connection is used, select this option.
[TV Mode]
Select the video output mode. To select the
progressive scan mode, ensure that you have
connected a progressive scan TV and set
[Component] to [Pr/Cr Pb/Cb Y] .
• [PROGRESSIVE] – For progressive
scan TV: turn on the progressive
scan mode.
Comments to this Manuals