Philips HTS3541/55 User Manual download pdf (Page 21)

19

English

EN

6 Update software

Philips continually tries to improve its products.

To get the best features and support, update your

home theatre with the latest software.

Compare the version of your current software with

the latest version on www.philips.com/support. If

the current version is lower than the latest version

available on the Philips support website, upgrade

your home theatre with the latest software.

Caution

•

Do not install a lower version of software than

the version currently installed on your product.

Philips is not liable for problems caused due to

software downgrading.

Check software version

Check the version of the software currently

installed on your home theatre.

1 Press ( Home ).

2 Select [Setup] , and then press OK .

3 Select [Advanced] > [Version Info.] , and then

press OK .

» The software version is displayed.

Update software through USB

What you need

• A USB ﬂ ash drive that is FAT or NTFS-

formatted, with at least 75 MB of memory.

Do not use a USB hard drive.

• A computer with Internet access.

• An archive utility that supports the ZIP ﬁ le

format.

Step 1: Download the latest software

1 Connect a USB ﬂ ash drive to your computer.

2 In your web browser, go to www.philips.com/

support.

3 At the Philips Support website, ﬁ nd your

product and locate the Software and drivers .

» The software update is available as a zip ﬁ le.

4 Save the zip ﬁ le in the root directory of your

USB ﬂ ash drive.

5 Use the archive utility to extract the software

update ﬁ le in the root directory.

» The ﬁ les are extracted in the UPG_ALL

folder on your USB ﬂ ash drive.

6 Disconnect the USB ﬂ ash drive from your

computer.

Step 2: Update the software

Caution

•

Do not switch off the home theatre or remove

the USB ﬂ ash drive during the update.

1 Connect the USB ﬂ ash drive containing the

downloaded ﬁ le to your home theatre.

• Make sure that the disc compartment is

closed and that there is no disc inside.

2 Press ( Home ).

3 Select [Setup] , and then press OK .

4 Select [Advanced] > [Software Update] > [USB] .

5 Follow the onscreen instructions to conﬁ rm

the update.

» Once complete, the home theatre

automatically switches off and restarts. If

it does not, disconnect the power cord

for a few seconds and then reconnect it.

Update software through the

Internet

1 Connect your home theatre to a home network

with a high-speed Internet access (see 'Connect

and set up a home network' on page 9 ) .

2 Press ( Home ).

3 Select [Setup] , and then press OK .

4 Select [Advanced] > [Software Update] >

[Network] .

» If upgrade media is detected, you are

prompted to start or cancel the update.

5 Follow the onscreen instructions to conﬁ rm

the update.

» Once complete, the home theatre

automatically switches off and restarts. If

it does not, disconnect the power cord

for a few seconds and then reconnect it.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 61 62

Comments to this Manuals

No comments