Philips HTS3541/55 User Manual download pdf (Page 12)

10 EN

Note

• To change the EasyLink control settings, press

( Home ), select [Setup] > [EasyLink] .

Set up the audio

If you cannot hear the audio output of a

connected device through your home theatre

speakers, check that you have enabled Easylink on

all the devices (see 'Enable EasyLink' on page 8 ) .

Then, set up the EasyLink audio control.

1 Press ( Home ).

2 Select [Setup] , and then press OK .

3 Select [EasyLink] > [System Audio Control]

> [On] .

• To play the audio from the TV speakers,

select [Off] and skip the following steps.

4 Select [EasyLink] > [Audio Input Mapping] .

5 Follow the onscreen instructions to map the

connected device to the audio inputs on your

home theatre.

• If you connect your home theatre to the

TV through an HDMI ARC connection,

make sure that the TV audio is mapped

to the ARC input on your home theatre.

Connect and set up a home

network

Connect your home theatre to a home network

with Internet access and enjoy:

• YouTube leanback

• Picasa web albums

• BD-Live applications

• Software update

Caution

•

Familiarise yourself with the network router

and networking principles. If necessary, read

documentation that accompanies the network

components. Philips is not responsible for lost,

damaged or corrupt data.

Before you start

• For software updates, make sure that the

network router has access to the Internet with

high-speed connection and is not restricted by

ﬁ rewalls or other security systems.

• Make the necessary connections described in

the quick start guide, and then switch the TV

to the correct source for your home theatre.

Set up the wired network

What you need

• A network cable (RJ45 straight cable).

• A network router (with DHCP enabled).

1 Using a network cable, connect the LAN

connector on your home theatre to the

network router.

2 Press ( Home ).

3 Select [Setup] , and then press OK .

4 Select [Network] > [Network Installation]

> [Wired (Ethernet)] .

5 Follow the onscreen instructions to complete

the setup.

• If connection fails, select [Retry] , and

then press OK .

6 Select [Finish] , and then press OK to exit.

• To view the network settings, select

[Setup] > [Network] > [View Network

Settings] .

LAN

www

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 61 62

Comments to this Manuals

No comments