Philips HDR5750/F7 User Manual download pdf (Page 75)

EN - 75

Error Message

Error message Cause Solution

—Please check the USB Device.—

Cannot find USB-HDD,

Or USB-HDD which cannot

be Recorded in this Device is

connected.

• The connected USB-HDD

Cannot be Recognized on this

Unit.

• You need to Register a USB-HDD to this Unit.

—Please check the USB Device.—

Abnormality occurred in USB

connection.

USB device has been Stopped

automatically.

• The connected USB-HDD

is detected to have an

overcurrent condition.

• Please Disconnect the USB-HDD.

Please Connect valid USB-HDD. • The USB-HDD is Not

Connected.

• The USB-HDD Does Not

have enough Space to

Complete the Recording.

• The USB-HDD is

Unregistered.

• Check if USB-HDD is Not Connected

properly.

• Check if the USB-HDD has enough Space.

• Check if the USB-HDD has been Registered to

this Unit.

You Cannot Operate this During

Moving.

• You Cannot Play back the Title

which is being Dubbed while

moving it.

• Cancel the Dubbing when necessary.

• Wait until the Dubbing is Finished.

• If you are still having trouble with the Unit after checking ‘Troubleshooting’ items, write down the Error description when

Calling our Help Line mentioned on the Front Page to locate an Authorized Service Center.

Continued on next page.

NETWORK

Cannot rent or buy movies / TV

episodes on VUDU.

• You need to activate the VUDU account. For detailed information, please visit

the service providers website at

http://www.vudu.com/product_overview.html

• Log into your account at http://my.vudu.com and check your payment

information.

The picture quality of streaming movie

(Netflix or VUDU) is poor.

• Check the speed of your Internet connection. You need speeds of at least

8 Mbps to this Unit for high quality uninterrupted playback.

Streaming movie (Netflix or VUDU)

often stops or starts buffering during

playback.

• Contact your Internet service provider to troubleshoot your Internet

connection for speed and line quality. Consistent line quality and speed are

very important for Internet video playback.

Cannot use Easy connect (WPS) to

connect to the Access Point.

• Connect the unit to the Access Point using Scan or Manual entry mode. If

the Access Point’s security mode is set to WEP*, change the setting to WPA

or WPA2 (recommended), then try Easy connect (WPS) again. (For Access

Point configuration, please consult its user manual or manufacturer.)

* WEP is not recommended to be used due to its Major security flaws.

Change the Security protocol on the wireless router to WPA or WPA2

(recommended) mode.

EEC30UH_Philips_SmartDVR_v1_EN.indb 75EEC30UH_Philips_SmartDVR_v1_EN.indb 75 2013/09/13 15:39:122013/09/13 15:39:12

1 2 ... 70 71 72 73 74 75 76 77 78 79

Comments to this Manuals

No comments

Philips HDR5750/F7 User Manual Page 75

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Philips HDR5750/F7