Philips MZ7 User Manual download pdf (Page 26)

26

English

3139 116 19161

Tape Deck Operation

“RECORDING ACTIVE” is

displayed.

• A recording is in progress.

™

Stop the recording or wait until it is

finished.

“CHANGE TO TAPE” is displayed.

• Tape dubbing is only possible in tape

mode.

™

Switch to tape mode by pressing TAPE.

Recording or playback cannot be

made or there is a decrease in audio

level.

• Dirty tape heads, capstans or pressure

rollers.

™

See section on tape deck maintenance.

• Magnetic build-up in the record/

playback head.

™

Use demagnetizing tape.

TROUBLESHOOTING

General

System does not react when any

button is pressed.

• Electrostatic discharge.

™

Press STANDBY•ON to switch the

system off. Remove the AC power plug

from the wall outlet, then reconnect the

power plug and switch on the system

again.

No or poor sound.

• Volume is not turned up.

™

Adjust VOLUME.

• The headphones are connected.

™

Disconnect the headphones.

• Speakers are not connected or are

connected wrongly.

™

Check that the speakers are connected

correctly.

™

Make sure the stripped speaker wire is

clamped.

Reversed left and right sound.

• Speakers are connected wrongly.

™

Check the speaker connections and

location.

Lack of bass sound or apparently

imprecise physical location of musical

instruments.

• Speakers are connected wrongly.

™

Check the speaker connection for

proper phasing, coloured/black wires to

coloured/black terminals.

Remote control has no effect on the

system.

• Wrong source is selected.

™

Select the source (CD, TUNER, etc.)

before pressing the function button,

(

É

,

í

,

ë

, etc.).

• The distance to the system is too large.

™

Reduce the distance.

• Batteries are inserted incorrectly.

™

Insert the batteries with their polarities

(+/– signs) as indicated.

• Batteries are exhausted.

™

Replace the batteries.

Timer not working.

• Clock is not set.

™

Set the clock.

• Timer is not switched on.

™

Press CLOCK/TIMER to switch on the

timer.

• Recording is in progress.

™

Stop dubbing/recording.

Clock setting is erased.

• There was a power failure.

™

Reset the clock.

System displays features automatically;

buttons flash continuously.

• Demonstration mode is switched on.

™

Press and hold STOP (on the system

only) for 5 seconds to switch off the

demonstration.

A howling sound at external source.

• You hear feedback when you are

listening and recording from the same

source simultaneously.

™

Press CDR/AUX to select CDRW mode.

1 2 ... 21 22 23 24 25 26

Comments to this Manuals

No comments